all the information about stone coate steel roofing and other building materials.stone coated steel roof in african market.
2011年8月20日星期六
Metal roof tile construction techniques
A pre-construction preparation
1) primary: primary metal tile applied on top of any roofing material.
2) require the use of dry wood keel timber (metal), size 30mm × 25mm, the surface shall be treated with preservatives.
3) tools to prepare: a hammer, tape measure, fountain, electric drills, saws, bending machines move.
4) Supplementary materials: sealants, riveting firmware, nails.
Second, the construction process:
(A) the installation of battens
1, according to put away the wooden keel row layout, the width of 30mm, 25mm high wooden fixed in the cement along the side on the grass-roots level (downstream), the required distance is not
Greater than 600mm, depth of not less than riveting into grassroots 30mm. Installed downstream of the screw is located on the downstream of the battens, the level should be a pick a direction
Root to maintain continuous, and only in the gutter off the roof on both sides of the line of control; spacing 368 mm
2, to ensure that battens on a flat surface, install the battens, the battens may be the next step up in different small wooden wedge, to adjust the battens surface roughness;
3, the metal roof, mountain wall, herringbone border outside the office, to meet the income side of the ridge tile and metal installation requirements, the wooden keel height increased 40mm;
4, vertical lightning rod battens can be installed in the same time, complement each other.
(B) the acceptance battens:
1, material inspection: to be embalmed after the difficulty of drying the wood or the deformation of the corresponding specifications of the metal.
2, size acceptance: battens cross-section size of 30mm × 25mm, error of ± 3mm.
3, the arrangement pitch Acceptance: In addition to both sides of the cornice at the roof and spaced less than 368mm battens, the battens of the standard spacing of 368mm.
4, the flatness of the inspection: for each roof battens pull, and error detection level, allowing the error 5mm.
5, stability and acceptance: Check for loose battens, with the grass roots are firmly connected.
(C) the installation of metal roofing
1, the metal roofing tiles on battens fixed to the fixed way for the level of metal nails nail set (see photo) requires less than 5 per tile, fixation,
Inserted into the battens is not less than 20mm
edited by stone coated metal roof tiles
2011年8月11日星期四
2011年08月11日
标签: 杂谈 |
titanium-zinc sheet metal roof, titanium-zinc roof - [Metal Roofing] titanium zinc panels are zinc and copper and titanium alloys, which composition does not contain iron, so it will not rust. After passivation the future, it will form a layer of light gray surface oxide layer, a layer of the building to provide effective and lasting protection. Widely used in public buildings (especially the landmarks), such as Airport, convention centers, cultural centers, sports stadiums, senior housing, office buildings of the roof.
Titanium zinc roof has the following advantages can be:
1. Durability: titanium-zinc sheet roof even in heavily polluted areas can still have a long life. To 0.7mm thick, for example, construction of properly designed roof life of at least 100 years. Europe and the United States of zinc sheet metal roof with a few hundred years of history, and now, due to the addition of titanium, zinc plate durability of modern and better.
2. Adaptability: titanium-zinc plate that is tough but also a high degree of extension, but also easy to be bent and welded on site, so for a variety of shapes architectural style. The weldability of complex shapes and to ensure the realization of the node; its scientific seams protect the roof system in the storm, when the roof of a larger three-dimensional deformation of the case is not leaking;
3. Maintenance: no maintenance, no color, gray tone throughout the life of the building; because of its unique self-healing properties, has even scratched the surface without any maintenance, it can in a short time restitution.
......
Titanium-zinc sheet metal roofingsystem is established through the use of edge and bite of professional equipment, along the strip length will be two panels up side to bite, which will connect the roof or wall as a whole. System does not require gluing, sewing, especially two-way captive and 100% of the structural waterproofing.
edited by stone coated steel roofing
Titanium zinc roof has the following advantages can be:
1. Durability: titanium-zinc sheet roof even in heavily polluted areas can still have a long life. To 0.7mm thick, for example, construction of properly designed roof life of at least 100 years. Europe and the United States of zinc sheet metal roof with a few hundred years of history, and now, due to the addition of titanium, zinc plate durability of modern and better.
2. Adaptability: titanium-zinc plate that is tough but also a high degree of extension, but also easy to be bent and welded on site, so for a variety of shapes architectural style. The weldability of complex shapes and to ensure the realization of the node; its scientific seams protect the roof system in the storm, when the roof of a larger three-dimensional deformation of the case is not leaking;
3. Maintenance: no maintenance, no color, gray tone throughout the life of the building; because of its unique self-healing properties, has even scratched the surface without any maintenance, it can in a short time restitution.
......
Titanium-zinc sheet metal roofing
edited by stone coated steel roofing
2011年7月25日星期一
Residential metal roofing system fstl.tuliaoren.com :2010 -01-03 paint net paint Lecture [Chinese] Abstract: In some areas, such as coastal and mountainous areas, the use of metal roofing system is more common than in the past. Metal Roofing Association (MRA) is expected, metal roofs in the residential roofing market share each year will be 20% to 25% growth rate. Perhaps the most fundamental is to clarify the different metal roofing products ...
In today's highly competitive roofing market, a contractor to be successful in the professional and quality must go in front, for example, to correctly select the roofing systems and products. Residential metal roofing system is good? Kinds of programs, will help to improve the status of contractors in the competition.
In recent years, residential metal roofing products in terms of applications has increased. In some areas, such as coastal and mountainous areas, the use of metal roofing system is more common than in the past.
Residential metal roof system
Experience shows that in the climate extremes, increasing use of metal roofing. Metal Roofing Association (MRA) is expected, metal roofs in the residential roofing market share each year will be 20% to 25% growth rate.
To achieve this goal, the metal roofing industry must continue to focus on improving the user's awareness, but also must increase efforts to roofing contractors and distributors of commercial products and their use for training. Perhaps the most fundamental is to clarify the different metal roof products as well as the difference between these differences in a successful meet the requirements of owners of metal roofing systems in the role.
An application for residential metal roofing is a mistake to think that the majority of roofing for new construction. In fact, NRCA annual market survey, 2004, 11 percent of residential metal roofing for new, renovation of 56%, 11% for the maintenance and repair.
Visible, more for the refurbishment of the metal roof, one of the reasons is that many metal roofing products can be laid on the existing roof, as well as some variety of standing seam metal tile products. Commercially available product variety and often people will do a muddle.
In North America, with over 100 vinyl tile, imitation shingles, slate and clay tile, concrete tile and other tile materials. Because each product is the exclusive production and sales, and not interoperable.
To ensure correct construction and application is necessary to understand some of the products of knowledge. 2 products in the decision to form a metal roofing system, it is necessary to choose the roof slope and geometry of the product.
For example, most of the roof tile products for the minimum slope of 3 / 12. The low sloping roof, the main use of on-site mechanical or hand joints standing seam panels, such as "double-lock" or "Three Rings" board.
Modulus products are mostly interlocking panels, ranging in size from 203 mm × 305mm to 610mm × 914 mm. This roofing system approach to a variety of thermal expansion and contraction problems.
Some used in the construction or expansion of sliding clip, when the thermal expansion board "floating" up; some products are designed with the use of the board, "folding" effect, the equivalent of S-shaped plate can withstand thermal expansion and contraction of many fold. Such products can be made into imitation or imitation slate glass tile, vinyl tile, and other imitation Tongwa or flat tile.
Stiffness of these products exist in the metal plate and with the space between the grassroots so that they can be self-connected in the renovated shop in the existing roof. In fact, such systems can even through the use of wood or tile shop in a special fixation on the shingle.
In addition to the special form of modulus board, there are many products available for residential vertical seam. These products from the shop to the house along the roof, and rafters or parallel or perpendicular.
Vertical seam roofing products include a variety of fixed waveforms through standing seam panels and products. Penetrate the roof panels have a variety of standard length, laying horizontal seams and ends with the overlap can also be broken in the field size to avoid the end of the lap.
The length of standing seam products are generally customized to meet the actual size of the roof. All vertical joints in laying a key factor when products must understand that the manufacturer is required on board laid on the slats or solid board.
Although these products are initially laid on the slats, but are often applied in agriculture manufacturer of solid board and asked to use the cushion. Penetration of fixed or fixed-length standing seam roofing products, safe transportation is very important, because sometimes board up to 8 m long or even longer.
To avoid such a transportation problem, sometimes the pressure-type machine can be moved into the field production. Even so, the board still need to be careful on-site transport and require specialized knowledge, because many board is shipped upright.
3 discussed above, various types of metal roofing product metal can be made of different metals to achieve specific effects and features. MRA survey of metal roofing products with the main material is steel, there are two forms, galvanized and Galvalume.
Galvanized steel zinc plated to improve corrosion resistance, Galvalume coated steel alloy, is also for preservation purposes. Both have a variety of steel grades.
Classification is based on both sides of the steel-plated zinc or aluminum coating thickness determined. Metal Construction Association, in accordance with quality standards, if the metal surface coating, then, G90 galvanized steel is the recommended minimum level, AZ50 Galvalume is the recommended minimum level.
If the transparent surface finishing or coating applied when the recommended level of Galvalume AZ 55. There are other metals can be used, such as aluminum, copper, zinc, stainless steel and tin-lead alloy.
Aluminum is mainly used for the purpose of preservation and use of its malleability, can be processed into a fine wood grain tile effect of the product. The roof is always made of aluminum coated or anodized to obtain a special color and better durability.
Copper, zinc and stainless steel more for no coating applications. Copper is mainly the use of its good durability and rich features aeruginous.
Zinc is also used for preservation purposes as well as its malleability, low-gloss gray appearance. Stainless steel is used to obtain long-lasting, shiny silver appearance or to meet specific corrosive environment.
4 Product Compatibility metal roof construction, according to the electrochemical point of view, the system used in all materials must be compatible, otherwise, and even between different metals and other materials will occur between electrolysis and corrosion. This includes fixtures, flashings, gutters and adjacent wall materials, they must be compatible or avoid contact.
As mentioned above, for aesthetic, many of the metal surface has a coating or overlay. There are several coatings, including acrylic, polyester, silicone polyester, and polyvinylidene fluoride (PVDF).
PVDF coatings are registered trade name of Kynar and Hvlar, they are always in shape before the coated metal roof on. More durable coating also includes color fastness and anti-powdering performance, this? Point, negotiate with customers is very important.
Familiar with the coatings industry knows that the most difficult to fade the pigment is an inorganic ceramic pigments, organic pigments expensive than the use of such inorganic pigment paint pigment than good. PVDF coating used to improve viscosity of the resin coating is a fluoride, can produce a strong molecular bond will firmly grasp the paint </ p>
? Prevent chalking. Some modulus metal tile is applied later in forming the coating, known as "coated", will help to ensure that the process of being stretched in the shape of the metal surface to get adequate coverage.
The most common type is coated stone cladding, there will be ceramic bonded to the steel surface of the stone surface. The other is applied in the molding powder coating the board, common with PVDF powder coatings.
These coatings make the products with a variety of textures and colors. Dedicated to improving the metal coating on the durability of metal roofing, steel roofing products in particular, coated with high-quality coatings to protect against climate grass-roots level, to make products with the durability of a method.
In addition, metal roofing system and many other advantages. 5 Advantages One of the advantages of metal shore side is light weight? Like aluminum tile roof weighs only 4.84 kg / m2, stone cladding tile roof is 16.15kg/m2, significantly lower than other roofing materials such as fiberglass shingles of 25.8 ~ 40 4kg/m2.
As the light weight, this product can be used in the original roof, applied to reduce the weight of the roof structure. In addition, the interlock metal roofing system features or non-interlock between the metal plate and the roof fixed and the fixed nature of most metal roofing system that has a good expose of the wind.
In many cases, the product can be achieved UL 580 "Standard Roof Wind exposing test" under the UL 90 level or UL1897 "wind exposed roof covering system standards" requirement. High wind exposing the metal roofing is the place to be given priority in many a reason, but in some places the use of the system is to use its fire resistance.
In fact, the last 1960s and 1970s in the United States some of the favorite places with shingles, vinyl tile on the use of aluminum and steel roofing products as fire. Over the past few decades the use of various types of metal roofing is a lot out of this consideration.
2003 International Building Code requirements for fire performance of roofing systems should be tested, but does not include steel and copper tile (board) roof, taking into account their inherent good fire performance. Of course, the metal roof during the pre-construction best check what the local building codes.
Another advantage of the metal system is above the coating allows it to be "cool" roofing system. Metal roof coating on the surface will not be set because of its smooth gray, more often than in the porous or rough coating on the surface of roofing materials can be longer and the light color to keep clean.
Owners from time to time with clean water rinse. In addition, for most of the coating on the metal roof with high radiation, according to the different coatings, the radiation rate of 0.75 minimum, maximum up to 0.95, so the roof to absorb heat quickly release back to the atmosphere.
As technology advances, many metal roofing products with a coating of infrared reflecting pigments to add these specially treated pigments, even in dark colors can also have very high solar reflective performance. For example, non-reflective surface of the metal coating of dark brown total solar reflectance of only 6% to 8%, reflecting pigments added, the total solar reflectance can be increased to 25% to 30% or even higher.
This meets the government agencies and public sector of the "cold" roof reflectivity requirements of the initial value. In addition, the metal roof system design and cushion between the metal roof or metal and the air space between the stationary set, heat conduction through the suspension to further improve energy efficiency.
Florida Solar Energy Center in accordance with the test, and the use of traditional roofing materials, many of the traditional metal tile roof in imitation of the still air of the attic space so that the heat is reduced by 30% or more of a factor. For laying the battens on the modulus of the product, and standing seam metal roofing products, it is still possible through a ventilation space to further improve energy efficiency.
Another advantage of metal products in the recycled material content. Most steel used in metal roofing with 25% to 35% recycled materials.
Non-ferrous metals such as aluminum, copper, recycled material content of up to 95%. Metal roofing is a major environmental factor in the sustainability of its excellent durability reduces the future consumption of raw materials.
The life of metal roofing system and related products used. Uncoated steel roofing can last 20 to 30 years, plus a longer coating life.
Have a coating or to the original stone cladding of the roof systems often guarantee period of up to 30 to 50 years, and re-applied coating life can be extended. Life even after the arrival of metal roofing can also be 100% recycling.
Most metal roofing easy to bend, to adapt to the unconventional form of roof design, including circular, oval and with a convex curve of the roof. For standing seam metal roofing system, many manufacturers offer matching wedge, narrow bottom width to accommodate the circular roof top needs, as well as curved concave or convex panels for the rafters.
Other hand, the modulus of the metal roofing panels have different ways to adapt to the special roof. Many tile cross-section is curved, for a round roof.
In addition, 381 mm or less exposed some of the module board is very easy for most of the roof curve. Of course, the most fundamental thing is to get the manufacturer's information and help to decide how to live doing the best.
6 Although some form of special accessories need custom sheet metal roofing and flashing, but residential metal roofing manufacturers offer a wide range of standardized accessories available for the eaves, gables, roof drains, roof and wall and roof slope change junction. In some cases, the manufacturer may also provide on-site production of attachments drawings.
Many residential roof detail, including the rain dripping from the roof oriented along the tank. On the standing seam roof system, the bottom edge of each piece of board or drip edge pieces around the starting roll.
Standing seam roof panels with a clip and grip, and then secure the upper plate.
For the vertical plate through a fixed and certain parts can not be locked into the starting tile-shaped plate, the manufacturer will usually provide sealing of the roof and finally fixed with detailed steps. There are several methods of disposal gable, usually depends on roof shape.
Roof gutters are three basic forms, used in conjunction with a variety of metal roofing: flat discoid drains, l or 2 drain pan so that the roof water and drain (open valley). The disposal of the roof there are several methods.
Most vertical plate with long roof and ridge cap? Long as 3 m or 4 m. Wall, roof slope changes and the transfer of processing often requires on-site production of the pan of water to meet the roof shape.
Manufacturers recommend some form of pan-water, in the small bending machine or metal working shop in the local production. Skylights and chimneys often need a special pan of water, some well-known brand manufacturers provide supporting pan of water.
For skylights and chimneys important to remember that should not be overly dependent on sealant. Although the need for the appearance of the sealant, waterproofing can be used as auxiliary means, but any metal roof system flashings the first line of defense should be a pan of water itself.
Sealant and the cushion is just an additional waterproofing measures. Skylight in the roof should be done on the circle, so that the roof height was significantly higher than the metal plate.
Whenever possible, the chimney at the pan of water should be embedded in masonry structure. Roof wall junction should be inserted or pan of water out into the wall up.
Attic ventilation and plumbing requirements shall be the manufacturer's construction. Metal roofing system designed specifically for the Pan-there are many kinds of water, sometimes even the color can be very well equipped.
Of course, experienced roofing contractor knows, when you think you have met all of the roof when a new issue again. It should be remembered </ p>
? Flashing basic design principle is to ensure water is always in the top surface of the plate movement. Good design often pan of water under the roof auxiliary water channel, in order to increase water reliability.
Another point is not to make the roof of garbage, leaves, snow and ice blocking the water path. In addition, the design of special flashings should consult the manufacturer or to the roof construction metal roof reference NRCA Manual (The NRCA Architectural SheetMetal and MetalRoofine Manu al).
7 roof ventilation ventilation manufacturers recommended practices, which may include proprietary products and markets for sale of roof ventilation products. Many vertical slit through the use of ventilation products, closed with a specially made so that air can flow between the ribs on the roof, eaves care pull air as the air inlet.
Many people have a wrong perception that metal roofing systems need to increase attic ventilation. In fact, no matter what kind of attic ventilation is critical in roofing materials, metal, and use of the system have not the slightest change.
In the choice of roof ventilation should also be considered when. Must remember </ p>
? Condensation of warm air and generation as the result of contact with cold surfaces. Attic ventilation is designed to eliminate the chance of condensation.
8 construction of residential metal roofing system to be set cushion reasons: to keep the roof structure during construction drying system; is an additional waterproofing means; make condensation occurred in the plate on the back, to avoid the damp grass roots roof. Although, 30 years shingle roofing mat is a standard option, but now contractors have turned to the synthesis of new lighter materials, so that each volume covers the area more.
Of course, there are requirements specification, can also use self-adhesive cushion. The surface of these products are smooth, without granules and thus will not damage the metal plate on the back.
Also, in most of the metal to be careful walking on the roof. Roofing contractor to the owner shows how to walk on the safer, better able to leave a written guide.
Walking on the steep roof, no matter what material is a challenge, metal roofing is no exception. In many cases, the fixed ladder on the roof, then support and ladder access aisle board composition.
Most manufacturers offer various forms of construction training. In the past, metal roofing for residential purposes, property owners and contractors, lack of training, lack of awareness is a major obstacle to the promotion of this roof, and now the situation has greatly improved.
edted by stone coated metal roof
In today's highly competitive roofing market, a contractor to be successful in the professional and quality must go in front, for example, to correctly select the roofing systems and products. Residential metal roofing system is good? Kinds of programs, will help to improve the status of contractors in the competition.
In recent years, residential metal roofing products in terms of applications has increased. In some areas, such as coastal and mountainous areas, the use of metal roofing system is more common than in the past.
Residential metal roof system
Experience shows that in the climate extremes, increasing use of metal roofing. Metal Roofing Association (MRA) is expected, metal roofs in the residential roofing market share each year will be 20% to 25% growth rate.
To achieve this goal, the metal roofing industry must continue to focus on improving the user's awareness, but also must increase efforts to roofing contractors and distributors of commercial products and their use for training. Perhaps the most fundamental is to clarify the different metal roof products as well as the difference between these differences in a successful meet the requirements of owners of metal roofing systems in the role.
An application for residential metal roofing is a mistake to think that the majority of roofing for new construction. In fact, NRCA annual market survey, 2004, 11 percent of residential metal roofing for new, renovation of 56%, 11% for the maintenance and repair.
Visible, more for the refurbishment of the metal roof, one of the reasons is that many metal roofing products can be laid on the existing roof, as well as some variety of standing seam metal tile products. Commercially available product variety and often people will do a muddle.
In North America, with over 100 vinyl tile, imitation shingles, slate and clay tile, concrete tile and other tile materials. Because each product is the exclusive production and sales, and not interoperable.
To ensure correct construction and application is necessary to understand some of the products of knowledge. 2 products in the decision to form a metal roofing system, it is necessary to choose the roof slope and geometry of the product.
For example, most of the roof tile products for the minimum slope of 3 / 12. The low sloping roof, the main use of on-site mechanical or hand joints standing seam panels, such as "double-lock" or "Three Rings" board.
Modulus products are mostly interlocking panels, ranging in size from 203 mm × 305mm to 610mm × 914 mm. This roofing system approach to a variety of thermal expansion and contraction problems.
Some used in the construction or expansion of sliding clip, when the thermal expansion board "floating" up; some products are designed with the use of the board, "folding" effect, the equivalent of S-shaped plate can withstand thermal expansion and contraction of many fold. Such products can be made into imitation or imitation slate glass tile, vinyl tile, and other imitation Tongwa or flat tile.
Stiffness of these products exist in the metal plate and with the space between the grassroots so that they can be self-connected in the renovated shop in the existing roof. In fact, such systems can even through the use of wood or tile shop in a special fixation on the shingle.
In addition to the special form of modulus board, there are many products available for residential vertical seam. These products from the shop to the house along the roof, and rafters or parallel or perpendicular.
Vertical seam roofing products include a variety of fixed waveforms through standing seam panels and products. Penetrate the roof panels have a variety of standard length, laying horizontal seams and ends with the overlap can also be broken in the field size to avoid the end of the lap.
The length of standing seam products are generally customized to meet the actual size of the roof. All vertical joints in laying a key factor when products must understand that the manufacturer is required on board laid on the slats or solid board.
Although these products are initially laid on the slats, but are often applied in agriculture manufacturer of solid board and asked to use the cushion. Penetration of fixed or fixed-length standing seam roofing products, safe transportation is very important, because sometimes board up to 8 m long or even longer.
To avoid such a transportation problem, sometimes the pressure-type machine can be moved into the field production. Even so, the board still need to be careful on-site transport and require specialized knowledge, because many board is shipped upright.
3 discussed above, various types of metal roofing product metal can be made of different metals to achieve specific effects and features. MRA survey of metal roofing products with the main material is steel, there are two forms, galvanized and Galvalume.
Galvanized steel zinc plated to improve corrosion resistance, Galvalume coated steel alloy, is also for preservation purposes. Both have a variety of steel grades.
Classification is based on both sides of the steel-plated zinc or aluminum coating thickness determined. Metal Construction Association, in accordance with quality standards, if the metal surface coating, then, G90 galvanized steel is the recommended minimum level, AZ50 Galvalume is the recommended minimum level.
If the transparent surface finishing or coating applied when the recommended level of Galvalume AZ 55. There are other metals can be used, such as aluminum, copper, zinc, stainless steel and tin-lead alloy.
Aluminum is mainly used for the purpose of preservation and use of its malleability, can be processed into a fine wood grain tile effect of the product. The roof is always made of aluminum coated or anodized to obtain a special color and better durability.
Copper, zinc and stainless steel more for no coating applications. Copper is mainly the use of its good durability and rich features aeruginous.
Zinc is also used for preservation purposes as well as its malleability, low-gloss gray appearance. Stainless steel is used to obtain long-lasting, shiny silver appearance or to meet specific corrosive environment.
4 Product Compatibility metal roof construction, according to the electrochemical point of view, the system used in all materials must be compatible, otherwise, and even between different metals and other materials will occur between electrolysis and corrosion. This includes fixtures, flashings, gutters and adjacent wall materials, they must be compatible or avoid contact.
As mentioned above, for aesthetic, many of the metal surface has a coating or overlay. There are several coatings, including acrylic, polyester, silicone polyester, and polyvinylidene fluoride (PVDF).
PVDF coatings are registered trade name of Kynar and Hvlar, they are always in shape before the coated metal roof on. More durable coating also includes color fastness and anti-powdering performance, this? Point, negotiate with customers is very important.
Familiar with the coatings industry knows that the most difficult to fade the pigment is an inorganic ceramic pigments, organic pigments expensive than the use of such inorganic pigment paint pigment than good. PVDF coating used to improve viscosity of the resin coating is a fluoride, can produce a strong molecular bond will firmly grasp the paint </ p>
? Prevent chalking. Some modulus metal tile is applied later in forming the coating, known as "coated", will help to ensure that the process of being stretched in the shape of the metal surface to get adequate coverage.
The most common type is coated stone cladding, there will be ceramic bonded to the steel surface of the stone surface. The other is applied in the molding powder coating the board, common with PVDF powder coatings.
These coatings make the products with a variety of textures and colors. Dedicated to improving the metal coating on the durability of metal roofing, steel roofing products in particular, coated with high-quality coatings to protect against climate grass-roots level, to make products with the durability of a method.
In addition, metal roofing system and many other advantages. 5 Advantages One of the advantages of metal shore side is light weight? Like aluminum tile roof weighs only 4.84 kg / m2, stone cladding tile roof is 16.15kg/m2, significantly lower than other roofing materials such as fiberglass shingles of 25.8 ~ 40 4kg/m2.
As the light weight, this product can be used in the original roof, applied to reduce the weight of the roof structure. In addition, the interlock metal roofing system features or non-interlock between the metal plate and the roof fixed and the fixed nature of most metal roofing system that has a good expose of the wind.
In many cases, the product can be achieved UL 580 "Standard Roof Wind exposing test" under the UL 90 level or UL1897 "wind exposed roof covering system standards" requirement. High wind exposing the metal roofing is the place to be given priority in many a reason, but in some places the use of the system is to use its fire resistance.
In fact, the last 1960s and 1970s in the United States some of the favorite places with shingles, vinyl tile on the use of aluminum and steel roofing products as fire. Over the past few decades the use of various types of metal roofing is a lot out of this consideration.
2003 International Building Code requirements for fire performance of roofing systems should be tested, but does not include steel and copper tile (board) roof, taking into account their inherent good fire performance. Of course, the metal roof during the pre-construction best check what the local building codes.
Another advantage of the metal system is above the coating allows it to be "cool" roofing system. Metal roof coating on the surface will not be set because of its smooth gray, more often than in the porous or rough coating on the surface of roofing materials can be longer and the light color to keep clean.
Owners from time to time with clean water rinse. In addition, for most of the coating on the metal roof with high radiation, according to the different coatings, the radiation rate of 0.75 minimum, maximum up to 0.95, so the roof to absorb heat quickly release back to the atmosphere.
As technology advances, many metal roofing products with a coating of infrared reflecting pigments to add these specially treated pigments, even in dark colors can also have very high solar reflective performance. For example, non-reflective surface of the metal coating of dark brown total solar reflectance of only 6% to 8%, reflecting pigments added, the total solar reflectance can be increased to 25% to 30% or even higher.
This meets the government agencies and public sector of the "cold" roof reflectivity requirements of the initial value. In addition, the metal roof system design and cushion between the metal roof or metal and the air space between the stationary set, heat conduction through the suspension to further improve energy efficiency.
Florida Solar Energy Center in accordance with the test, and the use of traditional roofing materials, many of the traditional metal tile roof in imitation of the still air of the attic space so that the heat is reduced by 30% or more of a factor. For laying the battens on the modulus of the product, and standing seam metal roofing products, it is still possible through a ventilation space to further improve energy efficiency.
Another advantage of metal products in the recycled material content. Most steel used in metal roofing with 25% to 35% recycled materials.
Non-ferrous metals such as aluminum, copper, recycled material content of up to 95%. Metal roofing is a major environmental factor in the sustainability of its excellent durability reduces the future consumption of raw materials.
The life of metal roofing system and related products used. Uncoated steel roofing can last 20 to 30 years, plus a longer coating life.
Have a coating or to the original stone cladding of the roof systems often guarantee period of up to 30 to 50 years, and re-applied coating life can be extended. Life even after the arrival of metal roofing can also be 100% recycling.
Most metal roofing easy to bend, to adapt to the unconventional form of roof design, including circular, oval and with a convex curve of the roof. For standing seam metal roofing system, many manufacturers offer matching wedge, narrow bottom width to accommodate the circular roof top needs, as well as curved concave or convex panels for the rafters.
Other hand, the modulus of the metal roofing panels have different ways to adapt to the special roof. Many tile cross-section is curved, for a round roof.
In addition, 381 mm or less exposed some of the module board is very easy for most of the roof curve. Of course, the most fundamental thing is to get the manufacturer's information and help to decide how to live doing the best.
6 Although some form of special accessories need custom sheet metal roofing and flashing, but residential metal roofing manufacturers offer a wide range of standardized accessories available for the eaves, gables, roof drains, roof and wall and roof slope change junction. In some cases, the manufacturer may also provide on-site production of attachments drawings.
Many residential roof detail, including the rain dripping from the roof oriented along the tank. On the standing seam roof system, the bottom edge of each piece of board or drip edge pieces around the starting roll.
Standing seam roof panels with a clip and grip, and then secure the upper plate.
For the vertical plate through a fixed and certain parts can not be locked into the starting tile-shaped plate, the manufacturer will usually provide sealing of the roof and finally fixed with detailed steps. There are several methods of disposal gable, usually depends on roof shape.
Roof gutters are three basic forms, used in conjunction with a variety of metal roofing: flat discoid drains, l or 2 drain pan so that the roof water and drain (open valley). The disposal of the roof there are several methods.
Most vertical plate with long roof and ridge cap? Long as 3 m or 4 m. Wall, roof slope changes and the transfer of processing often requires on-site production of the pan of water to meet the roof shape.
Manufacturers recommend some form of pan-water, in the small bending machine or metal working shop in the local production. Skylights and chimneys often need a special pan of water, some well-known brand manufacturers provide supporting pan of water.
For skylights and chimneys important to remember that should not be overly dependent on sealant. Although the need for the appearance of the sealant, waterproofing can be used as auxiliary means, but any metal roof system flashings the first line of defense should be a pan of water itself.
Sealant and the cushion is just an additional waterproofing measures. Skylight in the roof should be done on the circle, so that the roof height was significantly higher than the metal plate.
Whenever possible, the chimney at the pan of water should be embedded in masonry structure. Roof wall junction should be inserted or pan of water out into the wall up.
Attic ventilation and plumbing requirements shall be the manufacturer's construction. Metal roofing system designed specifically for the Pan-there are many kinds of water, sometimes even the color can be very well equipped.
Of course, experienced roofing contractor knows, when you think you have met all of the roof when a new issue again. It should be remembered </ p>
? Flashing basic design principle is to ensure water is always in the top surface of the plate movement. Good design often pan of water under the roof auxiliary water channel, in order to increase water reliability.
Another point is not to make the roof of garbage, leaves, snow and ice blocking the water path. In addition, the design of special flashings should consult the manufacturer or to the roof construction metal roof reference NRCA Manual (The NRCA Architectural SheetMetal and MetalRoofine Manu al).
7 roof ventilation ventilation manufacturers recommended practices, which may include proprietary products and markets for sale of roof ventilation products. Many vertical slit through the use of ventilation products, closed with a specially made so that air can flow between the ribs on the roof, eaves care pull air as the air inlet.
Many people have a wrong perception that metal roofing systems need to increase attic ventilation. In fact, no matter what kind of attic ventilation is critical in roofing materials, metal, and use of the system have not the slightest change.
In the choice of roof ventilation should also be considered when. Must remember </ p>
? Condensation of warm air and generation as the result of contact with cold surfaces. Attic ventilation is designed to eliminate the chance of condensation.
8 construction of residential metal roofing system to be set cushion reasons: to keep the roof structure during construction drying system; is an additional waterproofing means; make condensation occurred in the plate on the back, to avoid the damp grass roots roof. Although, 30 years shingle roofing mat is a standard option, but now contractors have turned to the synthesis of new lighter materials, so that each volume covers the area more.
Of course, there are requirements specification, can also use self-adhesive cushion. The surface of these products are smooth, without granules and thus will not damage the metal plate on the back.
Also, in most of the metal to be careful walking on the roof. Roofing contractor to the owner shows how to walk on the safer, better able to leave a written guide.
Walking on the steep roof, no matter what material is a challenge, metal roofing is no exception. In many cases, the fixed ladder on the roof, then support and ladder access aisle board composition.
Most manufacturers offer various forms of construction training. In the past, metal roofing for residential purposes, property owners and contractors, lack of training, lack of awareness is a major obstacle to the promotion of this roof, and now the situation has greatly improved.
edted by stone coated metal roof
2011年7月23日星期六
Metal roofing catalog
First, the definition of metal roofing
Second, the metal roof type
Third, the metal roofing material
Fourth, the metal roofing system
1) up side bite System 2) roofing system 3) classic buckle cover system 4) Flat lock systems 5) flat slab system, 6) pressure plate system 7) cell plate systems 8) metal roofing system
Fifth, metal roofing design factors to be considered one, the definition of metal roofing
Second, the metal roof type
Third, the metal roofing material
Fourth, the metal roofing system
1) up side bite System 2) roofing system 3) classic buckle cover system 4) Flat lock systems 5) flat slab system, 6) pressure plate system 7) cell plate systems 8) metal roofing system
Fifth, metal roofing design factors to be considered
Edit this paragraph a start, the definition of metal roofing
Metal roofing is the use of sheet metal as the roof material, the structure layer and waterproof layer into one of the roof form. Many different types of sheet metal, zinc plate, galvanized plate, aluminum plate, aluminum-magnesium alloy plate, titanium plate, copper, stainless steel panels. Thickness of 0.4 ~ 1.5mm, the surface of the general board for coating processing. As the quality of different materials and coatings, and some panel life of up to 50 years. The production of a variety of plate shape, and some composite panels, about two layers of insulation composite sheet metal in between, and some for the board, the construction, some panels in the plant is completed on-site assembly, according to some roofing projects require on-site processing. Insulation and some good in the factory compound, can also be produced in the field. So the sheet metal roof forms, from large public buildings to factories, warehouses, housing, etc. are used. Therefore, sheet metal roofing specification scope is waterproof grade I ~ III-class roof. [1] Edit this paragraph two, the metal roof type
Roof to roll joints sealed together design, production and design of the construction site with the same length of roof, installed after the roof construction without its connection, and there is no exposed screws, in addition to the appearance of the roof to ensure the integrity of the building, both Premium waterproof, anti-seepage, anti-snow function. Board design 65 and 75 mm high rib rib up from from 300 to 500 mm with high-performance drainage section, an effective solution to low-slope roof (> 1.5 °) water and drainage problems. faszip65-420R and 75-400R of the plate specially designed to enhance board reinforcement ribs to increase structural strength, and building exterior lines to provide more texture, the main supply in southwest China market.
Contact: 4008862300
65-300/400/500 board design more supple plastic, inside and outside the arc shape to fit the size of architectural design; and 75-380/480 board design while retaining the plasticity, the special height rib tank to 75mm, with a thick composite double-layer bottom plate roof system, more suitable for coastal typhoon rain-fed areas. Features without its connection, no screw holes, made the building the appearance of integrity within the arc can be curved and the outer arcs choice of different materials and colors overall structural waterproofing, drainage can be used to slope down to 1.5 ° of roofing excellent performance of wind pressure (with the bottom plate), especially for typhoons, storms are more areas to eliminate the pressure generated by thermal expansion and contraction is simple, fast machine roll together, convenient and economic to facilitate the laying insulation sound-absorbing layer without chemical caulking compounds, eliminating the problem of pollution and aging roof may need to maintain production at the site easy to stand upright double 80-400/420 quick lock side, roof and the use of 360 pairs of folding bracket bite mode, Edge is a seal can be folded up and the standing seam, standing seam this fully engaged with the bracket to form a continuous weather roof, so water is basically no chance to enter the building. Holder's consideration of thermal displacement, making the plate in the length direction of the relative displacement can be produced, eliminating the stress generated when the roof inflated. Edit this paragraph three, metal roofing material
All roof and exterior structure of the roof imported dedicated AA3004 series Al-Mg-Mn alloy sheet production; other special items can be equipped in accordance with the 3004 Al-Mg-Mn alloy, stainless steel 304 / 316, copper or titanium metal building dedicated . Special aluminum alloy for the production of roofing systems, the useful life of the main building with the same [British standard BS5427: 1976]. Al-Mg-Mn alloy sheet pre-painted and can be accompanied by another American or Australian imports of construction-specific PVDF / PVF2 polyvinylidene fluoride / color coating fluorocarbon resin paint system, used in industrial and civil construction, and painted life span 15-20 years, depending on atmospheric conditions []. 3105 * 3005 and other aluminum alloy is also a common European roof and wall materials. * If the requirements for the maritime climate, better corrosion resistance can be equipped with aluminum-magnesium alloy 5005 and 5052. * 3004 H44 aluminum-magnesium alloy of aluminum, manganese one. H44 is the layer and annealing condition. Edit this paragraph four, metal roofing system
1) up side seam system
(1) the overall structural waterproofing, drainage, regardless of how the building shape, can fully engaged seams, no nail holes throughout the roof, the roof can either make changes in the free expansion temperature to prevent thermal stress, but also put an end to the screw by the system fixation caused by the leakage risk. (2) No chemical caulking compounds, eliminating the pollution and aging. (3) the overall maturity of the roof openings and lightning protection system design. (4), good ventilation, maintain the overall structure of the long-term natural drying, to extend the building life. (5) specific three-dimensional curved arc shape and easy processing. (6) structure is simple, lightweight, safe, high strength and resistance to negative pressure in the typhoon, heavy rain area is especially suitable. (7) also applies to the old roof in the old house renovation and construction of new roof surface. (8) construction of safe, simple, fast, accurate and economical.
2) roofing system
(1) is a lightweight, high strength, waterproof, corrosion-resistant, highly adaptable and environmentally friendly system, easy and other building materials and systems integration. (2) stand side bite plate and the plate, no leakage of the lap joint problems, waterproof and reliable. (3) exhaust port, sunroof, pipeline exports directly piercing, using welding accessories, to ensure water tightness. (4) bearing occlusal side and the formation of hidden connections, solve the resulting thermal expansion and contraction due to destructive. (5) bearing insulation pads, a metal roofing system to solve heat conduction problems. (6) the advantages of low weight system to the roof renovation, transformation, have the advantage.
3) classic buckle cover system
(1) the overall structural waterproofing and drainage functions. (2) without chemical adhesive caulk caulking, remove the pollution and aging. (3) natural circulation ventilation structure, to extend the building life. (4) simple structure, compact and safe.
4) Flat lock systems
(1) the overall structural waterproofing and drainage functions. (2) without chemical caulking compounds, eliminating the pollution and aging. (3) natural circulation ventilation structure, to extend the building life. (4) specific three-dimensional curved arc shape and easy processing. (5) simple structure, lightweight, safe, diverse grid. (6) construction safety, fast, accurate and economic
5) flat slab system
Is a difficult process to use the sheet metal panel system, requiring stainless steel, titanium and other metal surfaces smooth, and double waterproof, so the system has within the collection tank. Mainly used for difficult to process the plate.
6) pressure plate system
For simple roof structure, the sheet metal roofing systems, is the most economical system, widely used for civil and industrial buildings public buildings roof, such as stadiums, awning, exhibition halls, stadiums, auditoriums, industrial plants and other buildings.
7) cell plate systems
(1) the use of air pressure chamber works such as water, and there will be a small amount of water within the tank discharge guide. (2) without chemical caulking compounds, eliminating the pollution and aging.
8) metal roofing system
360 ° double-crimping fully supported roofing system, water filling without other auxiliary materials, roof ribs to 360 ° folding electric lock closure, to win the title of the roof off completely impermeable, waterproof. Roof can make a special three-dimensional processing into the arc, arc of different sizes can be installed into the dome. The board has a high rib, in improving the water resistance, this can also make the roof line is more obvious, and available materials in addition to steel, there are aluminum, stainless steel, titanium and other metals zinc and copper, making the more colorful metal roofing . Choose a variety of materials up to roof and wall systems have the choice of material, its up to 88% material utilization, for the discerning architects use materials, precious metals as a roofing system provides a convenient and possible, to enhance the overall roof waterproofing effect and construction grade at the same time, access to good economic indicators of performance. For selection of materials: titanium, copper, titanium zinc, copper, stainless steel, magnesium manganese alloy, anodized aluminum, galvanized steel and so on. Features: 1. Overall structural waterproofing, drainage features; 2 structure is simple, lightweight, safe; 3 construction and installation of flexible, rapid, accurate, and the economy; 4 without silicone caulking, silicone to avoid pollution problems of aging, life extension ; 5 natural cycle of ventilation structure, increase life expectancy; 6 three-dimensional curved arc shape easily; edit this paragraph five, metal roofing design factors to be considered
Bearing to withstand construction loads, rain, dust, snow pressure, maintenance load. Performance and load-bearing metal roof plate section properties, the strength of the material thickness, the force transmission means, purlins (Vice purlin) spacing on. Maximum wind pressure resistance of local wind pressure, the metal roof will not be pulled off the negative air pressure. Wind resistance and the metal roof and the bracket buckle together, the bracket density. Prevent the spread of noise from the outdoor sound indoors or outdoors from the interior spread. Fill in the layer of metal roofing insulation materials (usually cotton as insulation), the effect of metal roofing insulation layer on both sides of the sound intensity difference in decibels. Sound insulation and sound insulation material density, thickness. It should be noted: insulation material for different frequencies of sound barrier effect is not the same. Impermeable to prevent rainwater infiltration from the outside to inside the metal roof. Rain water mainly through the gap or overlap the node into the metal roof. Impervious to achieve the function, need to screw the mouth after using the gasket fixed with hidden, in the board's lap with sealant or welding process, it is best to use a long-pass plate to eliminate overlap, in a variety of node parts of the abdominal distension tight waterproofing treatment. Lightning the lead to ground lightning, thunder and lightning to prevent the breakdown of metal roof into the interior. Lighting during the day to improve indoor lighting through skylights to save energy. A specific location in the metal roofing panels or lighting glass lighting arrangement should be considered the life of the metal roof skylights, in coordination with the metal roof skylights connection waterproofing treatment. Safety devices on the metal roof with fixed facilities, to protect construction workers and maintenance personnel. Prevent icicles forming at the eaves to prevent icicles in the rain and snow. Aesthetic appearance of metal roofing has a good texture, pleasing color. Control thermal expansion and contraction control of the contraction of the metal roof displacement and direction. Ensure that the temperature difference between the metal roof in the area will not produce thermal expansion and contraction of stress and damage. Insulation to prevent heat transfer on both sides of the metal roof, indoor temperatures stable. Function through the roof insulation under the metal fill insulation materials (commonly used with glass wool, rock wool) to achieve the insulation effect to the U-value, the unit is W/M2K. Insulation by the following factors: cotton insulation materials, density, thickness; insulation cotton humidity, and lower metal roof structure connection (to prevent "cold bridge" phenomenon); metal roofing layer capabilities of the repeated thermal radiation. Reduce the reflection of sound-absorbing sound, reducing indoor echo. Sound-absorbing function by the underlying metal roof were laid in the sound-absorbing cotton and punching on the floor to achieve. The acoustic properties of the metal roof to a sound absorption coefficient, said. Moisture to prevent the bottom of the metal roofing and metal roofing layer water vapor condensation to drain away the water vapor layer of metal roofing. The solution is filled in the metal layer of roof insulation cotton, capped with metal roof home floor waterproof membrane, metal roof can be ventilated on the node. Fire when the fire will not burn the metal roofing material, the flame will not penetrate the metal roof. Ventilation for indoor and outdoor air exchange. Set on the metal roof vents. Anti-snow avalanche in the area of the metal roof railings set on the snow block to prevent the sudden snow fall. Metal roofing material will not produce pollution-free environment, pollution, light metal roof surface without dye. Normal service life of metal roofing and the main building life should be the same as 25 years, 50 years, 100 years. Easy maintenance period in the use of metal roofing maintenance, lower maintenance costs. Metal roofing cost control construction costs.
edited by stone coated steel roofing
First, the definition of metal roofing
Second, the metal roof type
Third, the metal roofing material
Fourth, the metal roofing system
1) up side bite System 2) roofing system 3) classic buckle cover system 4) Flat lock systems 5) flat slab system, 6) pressure plate system 7) cell plate systems 8) metal roofing system
Fifth, metal roofing design factors to be considered one, the definition of metal roofing
Second, the metal roof type
Third, the metal roofing material
Fourth, the metal roofing system
1) up side bite System 2) roofing system 3) classic buckle cover system 4) Flat lock systems 5) flat slab system, 6) pressure plate system 7) cell plate systems 8) metal roofing system
Fifth, metal roofing design factors to be considered
Edit this paragraph a start, the definition of metal roofing
Metal roofing is the use of sheet metal as the roof material, the structure layer and waterproof layer into one of the roof form. Many different types of sheet metal, zinc plate, galvanized plate, aluminum plate, aluminum-magnesium alloy plate, titanium plate, copper, stainless steel panels. Thickness of 0.4 ~ 1.5mm, the surface of the general board for coating processing. As the quality of different materials and coatings, and some panel life of up to 50 years. The production of a variety of plate shape, and some composite panels, about two layers of insulation composite sheet metal in between, and some for the board, the construction, some panels in the plant is completed on-site assembly, according to some roofing projects require on-site processing. Insulation and some good in the factory compound, can also be produced in the field. So the sheet metal roof forms, from large public buildings to factories, warehouses, housing, etc. are used. Therefore, sheet metal roofing specification scope is waterproof grade I ~ III-class roof. [1] Edit this paragraph two, the metal roof type
Roof to roll joints sealed together design, production and design of the construction site with the same length of roof, installed after the roof construction without its connection, and there is no exposed screws, in addition to the appearance of the roof to ensure the integrity of the building, both Premium waterproof, anti-seepage, anti-snow function. Board design 65 and 75 mm high rib rib up from from 300 to 500 mm with high-performance drainage section, an effective solution to low-slope roof (> 1.5 °) water and drainage problems. faszip65-420R and 75-400R of the plate specially designed to enhance board reinforcement ribs to increase structural strength, and building exterior lines to provide more texture, the main supply in southwest China market.
Contact: 4008862300
65-300/400/500 board design more supple plastic, inside and outside the arc shape to fit the size of architectural design; and 75-380/480 board design while retaining the plasticity, the special height rib tank to 75mm, with a thick composite double-layer bottom plate roof system, more suitable for coastal typhoon rain-fed areas. Features without its connection, no screw holes, made the building the appearance of integrity within the arc can be curved and the outer arcs choice of different materials and colors overall structural waterproofing, drainage can be used to slope down to 1.5 ° of roofing excellent performance of wind pressure (with the bottom plate), especially for typhoons, storms are more areas to eliminate the pressure generated by thermal expansion and contraction is simple, fast machine roll together, convenient and economic to facilitate the laying insulation sound-absorbing layer without chemical caulking compounds, eliminating the problem of pollution and aging roof may need to maintain production at the site easy to stand upright double 80-400/420 quick lock side, roof and the use of 360 pairs of folding bracket bite mode, Edge is a seal can be folded up and the standing seam, standing seam this fully engaged with the bracket to form a continuous weather roof, so water is basically no chance to enter the building. Holder's consideration of thermal displacement, making the plate in the length direction of the relative displacement can be produced, eliminating the stress generated when the roof inflated. Edit this paragraph three, metal roofing material
All roof and exterior structure of the roof imported dedicated AA3004 series Al-Mg-Mn alloy sheet production; other special items can be equipped in accordance with the 3004 Al-Mg-Mn alloy, stainless steel 304 / 316, copper or titanium metal building dedicated . Special aluminum alloy for the production of roofing systems, the useful life of the main building with the same [British standard BS5427: 1976]. Al-Mg-Mn alloy sheet pre-painted and can be accompanied by another American or Australian imports of construction-specific PVDF / PVF2 polyvinylidene fluoride / color coating fluorocarbon resin paint system, used in industrial and civil construction, and painted life span 15-20 years, depending on atmospheric conditions []. 3105 * 3005 and other aluminum alloy is also a common European roof and wall materials. * If the requirements for the maritime climate, better corrosion resistance can be equipped with aluminum-magnesium alloy 5005 and 5052. * 3004 H44 aluminum-magnesium alloy of aluminum, manganese one. H44 is the layer and annealing condition. Edit this paragraph four, metal roofing system
1) up side seam system
(1) the overall structural waterproofing, drainage, regardless of how the building shape, can fully engaged seams, no nail holes throughout the roof, the roof can either make changes in the free expansion temperature to prevent thermal stress, but also put an end to the screw by the system fixation caused by the leakage risk. (2) No chemical caulking compounds, eliminating the pollution and aging. (3) the overall maturity of the roof openings and lightning protection system design. (4), good ventilation, maintain the overall structure of the long-term natural drying, to extend the building life. (5) specific three-dimensional curved arc shape and easy processing. (6) structure is simple, lightweight, safe, high strength and resistance to negative pressure in the typhoon, heavy rain area is especially suitable. (7) also applies to the old roof in the old house renovation and construction of new roof surface. (8) construction of safe, simple, fast, accurate and economical.
2) roofing system
(1) is a lightweight, high strength, waterproof, corrosion-resistant, highly adaptable and environmentally friendly system, easy and other building materials and systems integration. (2) stand side bite plate and the plate, no leakage of the lap joint problems, waterproof and reliable. (3) exhaust port, sunroof, pipeline exports directly piercing, using welding accessories, to ensure water tightness. (4) bearing occlusal side and the formation of hidden connections, solve the resulting thermal expansion and contraction due to destructive. (5) bearing insulation pads, a metal roofing system to solve heat conduction problems. (6) the advantages of low weight system to the roof renovation, transformation, have the advantage.
3) classic buckle cover system
(1) the overall structural waterproofing and drainage functions. (2) without chemical adhesive caulk caulking, remove the pollution and aging. (3) natural circulation ventilation structure, to extend the building life. (4) simple structure, compact and safe.
4) Flat lock systems
(1) the overall structural waterproofing and drainage functions. (2) without chemical caulking compounds, eliminating the pollution and aging. (3) natural circulation ventilation structure, to extend the building life. (4) specific three-dimensional curved arc shape and easy processing. (5) simple structure, lightweight, safe, diverse grid. (6) construction safety, fast, accurate and economic
5) flat slab system
Is a difficult process to use the sheet metal panel system, requiring stainless steel, titanium and other metal surfaces smooth, and double waterproof, so the system has within the collection tank. Mainly used for difficult to process the plate.
6) pressure plate system
For simple roof structure, the sheet metal roofing systems, is the most economical system, widely used for civil and industrial buildings public buildings roof, such as stadiums, awning, exhibition halls, stadiums, auditoriums, industrial plants and other buildings.
7) cell plate systems
(1) the use of air pressure chamber works such as water, and there will be a small amount of water within the tank discharge guide. (2) without chemical caulking compounds, eliminating the pollution and aging.
8) metal roofing system
360 ° double-crimping fully supported roofing system, water filling without other auxiliary materials, roof ribs to 360 ° folding electric lock closure, to win the title of the roof off completely impermeable, waterproof. Roof can make a special three-dimensional processing into the arc, arc of different sizes can be installed into the dome. The board has a high rib, in improving the water resistance, this can also make the roof line is more obvious, and available materials in addition to steel, there are aluminum, stainless steel, titanium and other metals zinc and copper, making the more colorful metal roofing . Choose a variety of materials up to roof and wall systems have the choice of material, its up to 88% material utilization, for the discerning architects use materials, precious metals as a roofing system provides a convenient and possible, to enhance the overall roof waterproofing effect and construction grade at the same time, access to good economic indicators of performance. For selection of materials: titanium, copper, titanium zinc, copper, stainless steel, magnesium manganese alloy, anodized aluminum, galvanized steel and so on. Features: 1. Overall structural waterproofing, drainage features; 2 structure is simple, lightweight, safe; 3 construction and installation of flexible, rapid, accurate, and the economy; 4 without silicone caulking, silicone to avoid pollution problems of aging, life extension ; 5 natural cycle of ventilation structure, increase life expectancy; 6 three-dimensional curved arc shape easily; edit this paragraph five, metal roofing design factors to be considered
Bearing to withstand construction loads, rain, dust, snow pressure, maintenance load. Performance and load-bearing metal roof plate section properties, the strength of the material thickness, the force transmission means, purlins (Vice purlin) spacing on. Maximum wind pressure resistance of local wind pressure, the metal roof will not be pulled off the negative air pressure. Wind resistance and the metal roof and the bracket buckle together, the bracket density. Prevent the spread of noise from the outdoor sound indoors or outdoors from the interior spread. Fill in the layer of metal roofing insulation materials (usually cotton as insulation), the effect of metal roofing insulation layer on both sides of the sound intensity difference in decibels. Sound insulation and sound insulation material density, thickness. It should be noted: insulation material for different frequencies of sound barrier effect is not the same. Impermeable to prevent rainwater infiltration from the outside to inside the metal roof. Rain water mainly through the gap or overlap the node into the metal roof. Impervious to achieve the function, need to screw the mouth after using the gasket fixed with hidden, in the board's lap with sealant or welding process, it is best to use a long-pass plate to eliminate overlap, in a variety of node parts of the abdominal distension tight waterproofing treatment. Lightning the lead to ground lightning, thunder and lightning to prevent the breakdown of metal roof into the interior. Lighting during the day to improve indoor lighting through skylights to save energy. A specific location in the metal roofing panels or lighting glass lighting arrangement should be considered the life of the metal roof skylights, in coordination with the metal roof skylights connection waterproofing treatment. Safety devices on the metal roof with fixed facilities, to protect construction workers and maintenance personnel. Prevent icicles forming at the eaves to prevent icicles in the rain and snow. Aesthetic appearance of metal roofing has a good texture, pleasing color. Control thermal expansion and contraction control of the contraction of the metal roof displacement and direction. Ensure that the temperature difference between the metal roof in the area will not produce thermal expansion and contraction of stress and damage. Insulation to prevent heat transfer on both sides of the metal roof, indoor temperatures stable. Function through the roof insulation under the metal fill insulation materials (commonly used with glass wool, rock wool) to achieve the insulation effect to the U-value, the unit is W/M2K. Insulation by the following factors: cotton insulation materials, density, thickness; insulation cotton humidity, and lower metal roof structure connection (to prevent "cold bridge" phenomenon); metal roofing layer capabilities of the repeated thermal radiation. Reduce the reflection of sound-absorbing sound, reducing indoor echo. Sound-absorbing function by the underlying metal roof were laid in the sound-absorbing cotton and punching on the floor to achieve. The acoustic properties of the metal roof to a sound absorption coefficient, said. Moisture to prevent the bottom of the metal roofing and metal roofing layer water vapor condensation to drain away the water vapor layer of metal roofing. The solution is filled in the metal layer of roof insulation cotton, capped with metal roof home floor waterproof membrane, metal roof can be ventilated on the node. Fire when the fire will not burn the metal roofing material, the flame will not penetrate the metal roof. Ventilation for indoor and outdoor air exchange. Set on the metal roof vents. Anti-snow avalanche in the area of the metal roof railings set on the snow block to prevent the sudden snow fall. Metal roofing material will not produce pollution-free environment, pollution, light metal roof surface without dye. Normal service life of metal roofing and the main building life should be the same as 25 years, 50 years, 100 years. Easy maintenance period in the use of metal roofing maintenance, lower maintenance costs. Metal roofing cost control construction costs.
edited by stone coated steel roofing
2011年7月19日星期二
Galvanized Metal Roof RepairHow to Use Galvanized Metal to Prevent Roof MoldHow to Repair a Galvanized Metal RoofHow to Prepare a Rusted Galvanized Metal Roof for PaintingHow do I Use Galvanized Metal to Prevent Roof Mold?What Is a Galvanized Metal Roof?
Print this article Galvanized metal lasts longer than asphalt shingles. When you are selecting a material for your roof, you are probably factoring in aesthetics, cost and durability. A galvanized metal roof compares fairly well to other options in cost and durability, with aesthetics being a matter of personal taste. Most new residential housing is roofed with asphalt shingles, although these don't last as long as metal roofing.
Material
Galvanized metal is created by dipping sheets of steel into molten zinc and causing it to adhere using an electric current. This process protects the surface of the steel from rust and makes it more durable in outdoor weather conditions. Steel roofing can also be painted or enameled, both of which are also designed to protect the steel from rust. Galvanized steel is used in many applications where the metal comes into contact with water, including pipes, buckets and water storage tanks.
Installation
Manufactured in sheets that are typically 2-feet wide and 8-, 10- or 12-feet long, these sheets have ridges built into them to increase their stiffness and as a place to put screws through where they are less likely to leak. Galvanized metal roofing is installed by screwing it down to furring strips that are laid horizontally on top of rafters. Metal roofing screws have rubber gaskets on them that press against the screw holes to prevent leakage.
Advantages
Inexpensive in comparison to many other kinds of roofing, galvanized metal roofing also requires less labor to install because the sheets are so big. A single 2 x 10-foot sheet of metal roofing covers 20 square feet of roof and can be installed in a fraction of the time that laying shingles would take. Metal roofing is very durable and will last for decades. Proper installation that allows for ventilation in the attic will help to prevent rust and prolong the life of the roofing.
Disadvantages
Metal roofing has become associated in many people's minds with barns and cheap rural housing, which is an unfair characterization, but many people don't like how it looks and prefer shingles. In a house without an attic, metal roofing can be very loud during a rainstorm. It can also get extremely hot under bright sun, adding to the heat in an attic and making working on it difficult during hot weather. If metal roofing isn't properly screwed down, there is a risk of it blowing off in severe storms and becoming a safety hazard.
References
Steel Roofing: Most Frequently Asked Questions
Mechanical Metals: Corrugated Metal Roofing and Siding Material
Berlin Metals: Galvanized Steel (Electro and Hot Dipped)
Photo Credit Comstock Images/Comstock/Getty Images;
Read Next: Galvanized Metal Roof Repair
.Did You Know? Surprising Facts About Common VeggiesHarvesting nature's bounty keeps vegetable gardeners busy from mid-summer to late fall. But if -- like most gardeners -- your interest grows as fast as your crops, you want to get all the dirt on your favorites. Unlocking these secrets can lead to the juiciest tomatoes, the crispest cucumbers, and the peppiest peppers. The more you know, the more you grow. -- By Jerri Farris
Related Articles & Videos
Galvanized Metal Roof Repair
. How to Install Metal Flashing in the Valley of a Roof
. How to Repaint a Residential Metal Roof
. How to Paint a Galvanized Metal Roof . How to Use Galvanized Metal to Prevent Roof Mold
. How to Prime New Galvanized Metal
. How do I Use Galvanized Metal to Prevent Roof Mold? .
What Parts Comprise a Metal Corrugated Roof? .
Galvanized Steel Roof Corrugated Styles .
Different Types of Metal .
edited by stone coated steel roofing tiles
Print this article Galvanized metal lasts longer than asphalt shingles. When you are selecting a material for your roof, you are probably factoring in aesthetics, cost and durability. A galvanized metal roof compares fairly well to other options in cost and durability, with aesthetics being a matter of personal taste. Most new residential housing is roofed with asphalt shingles, although these don't last as long as metal roofing.
Material
Galvanized metal is created by dipping sheets of steel into molten zinc and causing it to adhere using an electric current. This process protects the surface of the steel from rust and makes it more durable in outdoor weather conditions. Steel roofing can also be painted or enameled, both of which are also designed to protect the steel from rust. Galvanized steel is used in many applications where the metal comes into contact with water, including pipes, buckets and water storage tanks.
Installation
Manufactured in sheets that are typically 2-feet wide and 8-, 10- or 12-feet long, these sheets have ridges built into them to increase their stiffness and as a place to put screws through where they are less likely to leak. Galvanized metal roofing is installed by screwing it down to furring strips that are laid horizontally on top of rafters. Metal roofing screws have rubber gaskets on them that press against the screw holes to prevent leakage.
Advantages
Inexpensive in comparison to many other kinds of roofing, galvanized metal roofing also requires less labor to install because the sheets are so big. A single 2 x 10-foot sheet of metal roofing covers 20 square feet of roof and can be installed in a fraction of the time that laying shingles would take. Metal roofing is very durable and will last for decades. Proper installation that allows for ventilation in the attic will help to prevent rust and prolong the life of the roofing.
Disadvantages
Metal roofing has become associated in many people's minds with barns and cheap rural housing, which is an unfair characterization, but many people don't like how it looks and prefer shingles. In a house without an attic, metal roofing can be very loud during a rainstorm. It can also get extremely hot under bright sun, adding to the heat in an attic and making working on it difficult during hot weather. If metal roofing isn't properly screwed down, there is a risk of it blowing off in severe storms and becoming a safety hazard.
References
Steel Roofing: Most Frequently Asked Questions
Mechanical Metals: Corrugated Metal Roofing and Siding Material
Berlin Metals: Galvanized Steel (Electro and Hot Dipped)
Photo Credit Comstock Images/Comstock/Getty Images;
Read Next: Galvanized Metal Roof Repair
.Did You Know? Surprising Facts About Common VeggiesHarvesting nature's bounty keeps vegetable gardeners busy from mid-summer to late fall. But if -- like most gardeners -- your interest grows as fast as your crops, you want to get all the dirt on your favorites. Unlocking these secrets can lead to the juiciest tomatoes, the crispest cucumbers, and the peppiest peppers. The more you know, the more you grow. -- By Jerri Farris
Related Articles & Videos
Galvanized Metal Roof Repair
. How to Install Metal Flashing in the Valley of a Roof
. How to Repaint a Residential Metal Roof
. How to Paint a Galvanized Metal Roof . How to Use Galvanized Metal to Prevent Roof Mold
. How to Prime New Galvanized Metal
. How do I Use Galvanized Metal to Prevent Roof Mold? .
What Parts Comprise a Metal Corrugated Roof? .
Galvanized Steel Roof Corrugated Styles .
Different Types of Metal .
edited by stone coated steel roofing tiles
2011年7月18日星期一
There are many types of metal roofing, its design needs to consider the many factors required from the load-bearing panels, wind pressure, noise, seepage, lightning protection, lighting and aesthetics, etc. to consider. The following will need to consider metal roofing design to list of nineteen factors:
1, bearing
Withstand construction loads, rain, dust, snow pressure, maintenance load. Performance and load-bearing metal roof plate section properties, the strength of the material thickness, the force transmission means, purlins (Vice purlin) spacing on.
2, wind pressure
Local maximum wind pressure resistance, the metal roof will not be pulled off the negative air pressure. Wind resistance and the metal roof and the bracket buckle together, the bracket density.
3, noise
Reached from the outside to prevent the sound from the indoor or outdoor indoor spread. Fill in the layer of metal roofing insulation materials (usually cotton as insulation), the effect of metal roofing insulation layer on both sides of the sound intensity difference in decibels. Sound insulation and sound insulation material density, thickness. It should be noted: insulation material for different frequencies of sound barrier effect is not the same.
4, seepage
To prevent rainwater infiltration from the outside to the inside metal roof. Rain water mainly through the gap or overlap the node into the metal roof. Impervious to achieve the function, need to screw the mouth after using the gasket fixed with hidden, in the board's lap with sealant or welding process, it is best to use a long-pass plate to eliminate overlap, in a variety of node parts of the abdominal distension tight waterproofing treatment.
5, Lightning
To lead to ground lightning, thunder and lightning to prevent the breakdown of metal roof into the interior.
6, light
Improve indoor lighting through skylights during the day, to save energy. A specific location in the metal roofing panels or lighting glass lighting arrangement should be considered the life of the metal roof skylights, in coordination with the metal roof skylights connection waterproofing treatment.
Safety devices
Set on the metal roof fixed facilities to protect construction workers and maintenance personnel.
7, anti-icicle
Rain and snow at the eaves to prevent icicles formed at.
8, beautiful
Metal roofing looks good texture, pleasing color.
9, control thermal expansion and contraction
Control the contraction of the metal roof displacement and direction. Ensure that the temperature difference between the metal roof in the area will not produce thermal expansion and contraction of stress and damage.
10, insulation
Prevent heat transfer on both sides of the metal roof, indoor temperatures stable. Function through the roof insulation under the metal fill insulation materials (commonly used with glass wool, rock wool) to achieve the insulation effect to the U-value, the unit is W/M2K. Insulation by the following factors: cotton insulation materials, density, thickness; insulation cotton humidity, and lower metal roof structure connection (to prevent "cold bridge" phenomenon); metal roofing layer capabilities of the repeated thermal radiation.
11, sound-absorbing
Reduce the reflection of sound and reduce echo chamber. Sound-absorbing function by the underlying metal roof were laid in the sound-absorbing cotton and punching on the floor to achieve. The acoustic properties of the metal roof to a sound absorption coefficient, said.
12, moisture
To prevent the bottom of the metal roofing and metal roofing layer water vapor condensation to drain away the water vapor layer of metal roofing. The solution is filled in the metal layer of roof insulation cotton, capped with metal roof home floor waterproof membrane, metal roof can be ventilated on the node.
13, fire
Metal roofing materials when the fire is not burning, the flames will not penetrate the metal roof.
14, ventilation
Indoor and outside air exchange. Set on the metal roof vents.
15, anti-avalanche
In the snow on the roof area of the metal railings set to block the snow to prevent a sudden fall of snow.
16, no pollution
Metal roofing materials will not cause environmental pollution, light metal roof surface without dye.
17, normal life
Metal roofing the main building life should be the same as 25 years, 50 years, 100 years.
18, maintenance
Facilitate the use of metal roofs in the maintenance period, reducing maintenance costs.
19, the cost
Control of the metal roof construction costs.
Metal roofing is a relatively wide scope, from large public buildings to factories, warehouses, residential and others have used sheet metal roofing. Effective solution to traditional metal roofing roofing some of the defects.
edited by stone coated steel roofing
1, bearing
Withstand construction loads, rain, dust, snow pressure, maintenance load. Performance and load-bearing metal roof plate section properties, the strength of the material thickness, the force transmission means, purlins (Vice purlin) spacing on.
2, wind pressure
Local maximum wind pressure resistance, the metal roof will not be pulled off the negative air pressure. Wind resistance and the metal roof and the bracket buckle together, the bracket density.
3, noise
Reached from the outside to prevent the sound from the indoor or outdoor indoor spread. Fill in the layer of metal roofing insulation materials (usually cotton as insulation), the effect of metal roofing insulation layer on both sides of the sound intensity difference in decibels. Sound insulation and sound insulation material density, thickness. It should be noted: insulation material for different frequencies of sound barrier effect is not the same.
4, seepage
To prevent rainwater infiltration from the outside to the inside metal roof. Rain water mainly through the gap or overlap the node into the metal roof. Impervious to achieve the function, need to screw the mouth after using the gasket fixed with hidden, in the board's lap with sealant or welding process, it is best to use a long-pass plate to eliminate overlap, in a variety of node parts of the abdominal distension tight waterproofing treatment.
5, Lightning
To lead to ground lightning, thunder and lightning to prevent the breakdown of metal roof into the interior.
6, light
Improve indoor lighting through skylights during the day, to save energy. A specific location in the metal roofing panels or lighting glass lighting arrangement should be considered the life of the metal roof skylights, in coordination with the metal roof skylights connection waterproofing treatment.
Safety devices
Set on the metal roof fixed facilities to protect construction workers and maintenance personnel.
7, anti-icicle
Rain and snow at the eaves to prevent icicles formed at.
8, beautiful
Metal roofing looks good texture, pleasing color.
9, control thermal expansion and contraction
Control the contraction of the metal roof displacement and direction. Ensure that the temperature difference between the metal roof in the area will not produce thermal expansion and contraction of stress and damage.
10, insulation
Prevent heat transfer on both sides of the metal roof, indoor temperatures stable. Function through the roof insulation under the metal fill insulation materials (commonly used with glass wool, rock wool) to achieve the insulation effect to the U-value, the unit is W/M2K. Insulation by the following factors: cotton insulation materials, density, thickness; insulation cotton humidity, and lower metal roof structure connection (to prevent "cold bridge" phenomenon); metal roofing layer capabilities of the repeated thermal radiation.
11, sound-absorbing
Reduce the reflection of sound and reduce echo chamber. Sound-absorbing function by the underlying metal roof were laid in the sound-absorbing cotton and punching on the floor to achieve. The acoustic properties of the metal roof to a sound absorption coefficient, said.
12, moisture
To prevent the bottom of the metal roofing and metal roofing layer water vapor condensation to drain away the water vapor layer of metal roofing. The solution is filled in the metal layer of roof insulation cotton, capped with metal roof home floor waterproof membrane, metal roof can be ventilated on the node.
13, fire
Metal roofing materials when the fire is not burning, the flames will not penetrate the metal roof.
14, ventilation
Indoor and outside air exchange. Set on the metal roof vents.
15, anti-avalanche
In the snow on the roof area of the metal railings set to block the snow to prevent a sudden fall of snow.
16, no pollution
Metal roofing materials will not cause environmental pollution, light metal roof surface without dye.
17, normal life
Metal roofing the main building life should be the same as 25 years, 50 years, 100 years.
18, maintenance
Facilitate the use of metal roofs in the maintenance period, reducing maintenance costs.
19, the cost
Control of the metal roof construction costs.
Metal roofing is a relatively wide scope, from large public buildings to factories, warehouses, residential and others have used sheet metal roofing. Effective solution to traditional metal roofing roofing some of the defects.
edited by stone coated steel roofing
2011年7月16日星期六
Residential metal roofing system
http://china.toocle.com/ 2009 年 06 月 24 日 09:09 Social business
Business News Agency June 24
In today's highly competitive roofing market, a contractor to be successful in the professional and quality must go in front, for example, to correctly select the roofing systems and products. Residential metal roofing system is very good - kind of program will help to improve the status of contractors in the competition.
In recent years, residential metal roofing products in terms of applications has increased. In some areas, such as coastal and mountainous areas, the use of metal roofing system is more common than in the past. Experience shows that in the climate extremes, increasing use of metal roofing.
Metal Roofing Association (MRA) is expected, metal roofs in the residential roofing market share each year will be 20% to 25% growth rate. To achieve this goal, the metal roofing industry must continue to focus on improving the user's awareness, but also must increase efforts to roofing contractors and distributors of commercial products and their use for training. Perhaps the most fundamental is to clarify the different metal roofing products as well as the difference between these differences in a successful meet the requirements of owners of metal roofing systems in the role.
1 Application
Of residential metal roofing is a mistake to think that the majority of roofing for new construction. In fact, NRCA annual market survey, 2004, 11 percent of residential metal roofing for new, renovation of 56%, 11% for the maintenance and repair. Visible, more for the refurbishment of the metal roof, one of the reasons is that many metal roofing products can be laid on the existing roof, as well as some variety of standing seam metal tile products.
Commercially available product variety and often people will do a muddle. In North America, with over 100 vinyl tile, imitation shingles, slate and clay tile, concrete tile and other tile materials. Because each product is the exclusive production and sales, and not interoperable. To ensure correct construction and application is necessary to understand some of the products of knowledge.
2 Products
In determining the form of a metal roofing system, it is necessary to choose the roof slope and geometry of the product. For example, most of the roof tile products for the minimum slope of 3 / 12. The low sloping roof, the main use of on-site mechanical or hand joints standing seam panels, such as "double-lock" or "Three Rings" board.
Modulus products are mostly interlocking panels, ranging in size from 203 mm × 305mm to 610mm × 914 mm. This roofing system approach to a variety of thermal expansion and contraction problems. Some used in the construction or expansion of sliding clip, when the thermal expansion board "floating" up; some products are designed with the use of the board, "folding" effect, the equivalent of S-shaped plate can withstand thermal expansion and contraction of many fold. Such products can be made into imitation or imitation slate glass tile, vinyl tile, and other imitation Tongwa or flat tile.
Stiffness of these products exist in the metal plate and with the space between the grassroots so that they can be self-connected in the renovated shop in the existing roof. In fact, such systems can even through the use of wood or tile shop in a special fixation on the shingle.
In addition to the special form of modulus board, there are many products available for residential vertical seam. These products from the shop to the house along the roof, and rafters or parallel or perpendicular. Vertical seam roofing products include a variety of fixed waveforms through standing seam panels and products.
Penetrate the roof panels have a variety of standard length, laying horizontal seams and ends with the overlap can also be broken in the field size to avoid the end of the lap. The length of standing seam products are generally customized to meet the actual size of the roof.
All vertical joints in laying a key factor when products must understand that the manufacturer is required on board laid on the slats or solid board. Although these products are initially laid on the slats, but are often applied in agriculture manufacturer of solid board and asked to use the cushion.
Penetration of fixed or fixed-length standing seam roofing products, safe transportation is very important, because sometimes board up to 8 m long or even longer. To avoid such a transportation problem, sometimes the pressure-type machine can be moved into the field production. Even so, the board still need to be careful on-site transport and require specialized knowledge, because many board is shipped upright.
3 types of metal
Discussed above, a variety of metal roofing products can be made of different metals to achieve specific effects and features. MRA survey of metal roofing products with the main material is steel, there are two forms, galvanized and Galvalume.
Galvanized steel zinc plated to improve corrosion resistance, Galvalume coated steel alloy, is also for preservation purposes. Both have a variety of steel grades. Classification is based on both sides of the steel-plated zinc or aluminum coating thickness determined. Metal Construction Association, in accordance with quality standards, if the metal surface coating, then, G90 galvanized steel is the recommended minimum level, AZ50 Galvalume is the recommended minimum level. If the transparent surface finishing or coating applied when the recommended level of Galvalume AZ 55.
There are other metals can be used, such as aluminum, copper, zinc, stainless steel and tin-lead alloy. Aluminum is mainly used for the purpose of preservation and use of its malleability, can be processed into a fine wood grain tile effect of the product. The roof is always made of aluminum coated or anodized to obtain a special color and better durability. Copper, zinc and stainless steel more for no coating applications. Copper is mainly the use of its good durability and rich features aeruginous. Zinc is also used for preservation purposes as well as its malleability, low-gloss gray appearance. Stainless steel is used to obtain long-lasting, shiny silver appearance or to meet specific corrosive environment.
4 Product Compatibility
Metal roof construction, according to the electrochemical point of view, the system used in all materials must be compatible, otherwise, and even between different metals and other materials will occur between electrolysis and corrosion. This includes fixtures, flashings, gutters and adjacent wall materials, they must be compatible or avoid contact.
As mentioned above, for aesthetic, many of the metal surface has a coating or overlay. There are several coatings, including acrylic, polyester, silicone polyester, and polyvinylidene fluoride (PVDF). PVDF coatings are registered trade name of Kynar and Hvlar, they are always in shape before the coated metal roof on. More durable coating also includes color fastness and anti-powdering performance, this - point, negotiate with customers is very important.
Familiar with the coatings industry knows that the most difficult to fade the pigment is an inorganic ceramic pigments, organic pigments expensive than the use of such inorganic pigment paint pigment than good. PVDF coating used to improve viscosity of the resin coating is a fluoride, can produce a strong molecular bond will firmly grasp the paint to prevent chalking. Some modulus metal tile is applied later in forming the coating, known as "coated", will help to ensure that the process of being stretched in the shape of the metal surface to get adequate coverage. The most common type is coated stone cladding, there will be ceramic bonded to the steel surface of the stone surface. The other is applied in the molding powder coating the board, common with PVDF powder coatings. These coatings make the products with a variety of textures and colors.
Dedicated to improving the metal coating on the durability of metal roofing, steel roofing products in particular, coated with high-quality coatings to protect against climate grass-roots level, to make products with the durability of a method. In addition, metal roofing system and many other advantages.
5 Advantages
One of the advantages of metal shore side is light weight - like aluminum tile roof weighs only 4.84 kg / m2, stone cladding tile roof is 16.15kg/m2, significantly lower than other roofing materials such as fiberglass shingles is 25 .8 ~ 40 4kg/m2. As the light weight, this product can be used in the original roof, applied to reduce the weight on the roof structure.
In addition, the interlock metal roofing system features or non-interlock between the metal plate and the roof fixed and the fixed nature of most metal roofing system that has a good expose of the wind. In many cases, the product can be achieved UL 580 "Standard Roof Wind exposing test" under the UL 90 level or UL1897 "wind exposed roof covering system standards" requirement.
High wind exposing the metal roofing is the place to be given priority in many a reason, but in some places the use of the system is to use its fire resistance. In fact, the last 1960s and 1970s in the United States some of the favorite places with shingles, vinyl tile on the use of aluminum and steel roofing products as fire. Over the past few decades the use of various types of metal roofing is a lot out of this consideration.
2003 International Building Code requirements for fire performance of roofing systems should be tested, but does not include steel and copper tile (board) roof, taking into account their inherent good fire performance. Of course, the metal roof during the pre-construction best check what the local building codes.
Another advantage of the metal system is above the coating allows it to be "cool" roofing system. Metal roof coating on the surface will not be set because of its smooth gray, more often than in the porous or rough coating on the surface of roofing materials can be longer and the light color to keep clean. Owners from time to time with clean water rinse. In addition, for most of the coating on the metal roof with high radiation, according to the different coatings, the radiation rate of 0.75 minimum, maximum up to 0.95, so the roof to absorb heat quickly release back to the atmosphere.
As technology advances, many metal roofing products with a coating of infrared reflecting pigments to add these specially treated pigments, even in dark colors can also have very high solar reflective performance. For example, non-reflective surface of the metal coating of dark brown total solar reflectance of only 6% to 8%, reflecting pigments added, the total solar reflectance can be increased to 25% to 30% or even higher. This meets the government agencies and public sector of the "cold" roof reflectivity requirements of the initial value.
In addition, the metal roof system design and cushion between the metal roof or metal and the air space between the stationary set, heat conduction through the suspension to further improve energy efficiency. Florida Solar Energy Center in accordance with the test, and the use of traditional roofing materials, many of the traditional metal tile roof in imitation of the still air of the attic space so that the heat is reduced by 30% or more of a factor. For laying the battens on the modulus of the product, and standing seam metal roofing products, it is still possible through a ventilation space to further improve energy efficiency.
Another advantage of metal products in the recycled material content. Most steel used in metal roofing with 25% to 35% recycled materials. Non-ferrous metals such as aluminum, copper, recycled material content of up to 95%.
Metal roofing is a major environmental factor in the sustainability of its excellent durability reduces the future consumption of raw materials. The life of metal roofing system and related products used. Uncoated steel roofing can last 20 to 30 years, plus a longer coating life. Have a coating or to the original stone cladding of the roof systems often guarantee period of up to 30 to 50 years, and re-applied coating life can be extended. Life even after the arrival of metal roofing can also be 100% recycling.
Most metal roofing easy to bend, to adapt to the unconventional form of roof design, including circular, oval and with a convex curve of the roof. For standing seam metal roofing system, many manufacturers offer matching wedge, narrow bottom width to accommodate the circular roof top needs, as well as curved concave or convex panels for the rafters.
Other hand, the modulus of the metal roofing panels have different ways to adapt to the special roof. Many tile cross-section is curved, for a round roof. In addition, 381 mm or less exposed some of the module board is very easy for most of the roof curve. Of course, the most fundamental thing is to get the manufacturer's information and help to decide how to live doing the best.
6 Annex
Although some form of special needs of custom sheet metal roofing and flashing, but residential metal roofing manufacturers to provide a wide range of standardized accessories available for the eaves, gables, roof drains, roof and wall slope changes and roof junction . In some cases, the manufacturer may also provide on-site production of attachments drawings. Many residential roof detail, including the rain dripping from the roof oriented along the tank.
On the standing seam roof system, the bottom edge of each piece of board or drip edge pieces around the starting roll. Standing seam roof panels with a clip and grip, and then secure the upper plate. For the vertical plate through a fixed and certain parts can not be locked into the starting tile-shaped plate, the manufacturer will usually provide sealing of the roof and finally fixed with detailed steps.
There are several methods of disposal gable, usually depends on roof shape. Roof gutters are three basic forms, used in conjunction with a variety of metal roofing: flat discoid drains, l or 2 drain pan so that the roof water and drain (open valley).
The disposal of the roof there are several methods. Most vertical plate with long roof and ridge cap - as long 3 m or 4 m.
Wall, roof slope changes and the transfer of processing often requires on-site production of the pan of water to meet the roof shape. Manufacturers recommend some form of pan-water, in the small bending machine or metal working shop in the local production. Skylights and chimneys often need a special pan of water, some well-known brand manufacturers provide supporting pan of water.
For skylights and chimneys important to remember that should not be overly dependent on sealant. Although the need for the appearance of the sealant, waterproofing can be used as auxiliary means, but any metal roof system flashings the first line of defense should be a pan of water itself. Sealant and the cushion is just an additional waterproofing measures.
Skylight in the roof should be done on the circle, so that the roof height was significantly higher than the metal plate. Whenever possible, the chimney at the pan of water should be embedded in masonry structure. Roof wall junction should be inserted or pan of water out into the wall up.
Attic ventilation and plumbing requirements shall be the manufacturer's construction. Metal roofing system designed specifically for the Pan-there are many kinds of water, sometimes even the color can be very well equipped.
Of course, experienced roofing contractor knows, when you think you have met all of the roof when a new issue again. It should be remembered, flashing the basic principle is to design the water is always in the top surface of the plate movement. Good design often pan of water under the roof auxiliary water channel, in order to increase water reliability. Another point is not to make the roof of garbage, leaves, snow and ice blocking the water path. In addition, the design of special flashings should consult the manufacturer or to the roof construction metal roof reference NRCA Manual (The NRCA Architectural SheetMetal and MetalRoofine Manu al).
7 Ventilation
Roof ventilation manufacturers recommended practices, which may include proprietary products and markets for sale of roof ventilation products. Many vertical slit through the use of ventilation products, closed with a specially made so that air can flow between the ribs on the roof, eaves care pull air as the air inlet.
Many people have a wrong perception that metal roofing systems need to increase attic ventilation. In fact, no matter what kind of attic ventilation is critical in roofing materials, metal, and use of the system have not the slightest change. In the choice of roof ventilation should also be considered when. Must remember that the amount of condensation generated warm air and cold as the result of surface contact. Attic ventilation is designed to eliminate the chance of condensation.
8 Construction
Residential metal roofing system to be set up cushion on the grounds that: the system in the roof structure during construction to keep dry; an additional waterproofing means; make condensation occurred in the plate on the back, to avoid the damp grass roots roof.
Although, 30 years shingle roofing mat is a standard option, but now contractors have turned to the synthesis of new lighter materials, so that each volume covers the area more. Of course, there are requirements specification, can also use self-adhesive cushion. The surface of these products are smooth, without granules and thus will not damage the metal plate on the back.
Also, in most of the metal to be careful walking on the roof. Roofing contractor to the owner shows how to walk on the safer, better able to leave a written guide. Walking on the steep roof, no matter what material is a challenge, metal roofing is no exception. In many cases, the fixed ladder on the roof, then support and ladder access aisle board composition.
Most manufacturers offer various forms of construction training.
In the past, metal roofing for residential purposes, property owners and contractors, lack of training, lack of awareness is a major obstacle to the promotion of this roof, and now the situation has greatly improved.
http://china.toocle.com/ 2009 年 06 月 24 日 09:09 Social business
Business News Agency June 24
In today's highly competitive roofing market, a contractor to be successful in the professional and quality must go in front, for example, to correctly select the roofing systems and products. Residential metal roofing system is very good - kind of program will help to improve the status of contractors in the competition.
In recent years, residential metal roofing products in terms of applications has increased. In some areas, such as coastal and mountainous areas, the use of metal roofing system is more common than in the past. Experience shows that in the climate extremes, increasing use of metal roofing.
Metal Roofing Association (MRA) is expected, metal roofs in the residential roofing market share each year will be 20% to 25% growth rate. To achieve this goal, the metal roofing industry must continue to focus on improving the user's awareness, but also must increase efforts to roofing contractors and distributors of commercial products and their use for training. Perhaps the most fundamental is to clarify the different metal roofing products as well as the difference between these differences in a successful meet the requirements of owners of metal roofing systems in the role.
1 Application
Of residential metal roofing is a mistake to think that the majority of roofing for new construction. In fact, NRCA annual market survey, 2004, 11 percent of residential metal roofing for new, renovation of 56%, 11% for the maintenance and repair. Visible, more for the refurbishment of the metal roof, one of the reasons is that many metal roofing products can be laid on the existing roof, as well as some variety of standing seam metal tile products.
Commercially available product variety and often people will do a muddle. In North America, with over 100 vinyl tile, imitation shingles, slate and clay tile, concrete tile and other tile materials. Because each product is the exclusive production and sales, and not interoperable. To ensure correct construction and application is necessary to understand some of the products of knowledge.
2 Products
In determining the form of a metal roofing system, it is necessary to choose the roof slope and geometry of the product. For example, most of the roof tile products for the minimum slope of 3 / 12. The low sloping roof, the main use of on-site mechanical or hand joints standing seam panels, such as "double-lock" or "Three Rings" board.
Modulus products are mostly interlocking panels, ranging in size from 203 mm × 305mm to 610mm × 914 mm. This roofing system approach to a variety of thermal expansion and contraction problems. Some used in the construction or expansion of sliding clip, when the thermal expansion board "floating" up; some products are designed with the use of the board, "folding" effect, the equivalent of S-shaped plate can withstand thermal expansion and contraction of many fold. Such products can be made into imitation or imitation slate glass tile, vinyl tile, and other imitation Tongwa or flat tile.
Stiffness of these products exist in the metal plate and with the space between the grassroots so that they can be self-connected in the renovated shop in the existing roof. In fact, such systems can even through the use of wood or tile shop in a special fixation on the shingle.
In addition to the special form of modulus board, there are many products available for residential vertical seam. These products from the shop to the house along the roof, and rafters or parallel or perpendicular. Vertical seam roofing products include a variety of fixed waveforms through standing seam panels and products.
Penetrate the roof panels have a variety of standard length, laying horizontal seams and ends with the overlap can also be broken in the field size to avoid the end of the lap. The length of standing seam products are generally customized to meet the actual size of the roof.
All vertical joints in laying a key factor when products must understand that the manufacturer is required on board laid on the slats or solid board. Although these products are initially laid on the slats, but are often applied in agriculture manufacturer of solid board and asked to use the cushion.
Penetration of fixed or fixed-length standing seam roofing products, safe transportation is very important, because sometimes board up to 8 m long or even longer. To avoid such a transportation problem, sometimes the pressure-type machine can be moved into the field production. Even so, the board still need to be careful on-site transport and require specialized knowledge, because many board is shipped upright.
3 types of metal
Discussed above, a variety of metal roofing products can be made of different metals to achieve specific effects and features. MRA survey of metal roofing products with the main material is steel, there are two forms, galvanized and Galvalume.
Galvanized steel zinc plated to improve corrosion resistance, Galvalume coated steel alloy, is also for preservation purposes. Both have a variety of steel grades. Classification is based on both sides of the steel-plated zinc or aluminum coating thickness determined. Metal Construction Association, in accordance with quality standards, if the metal surface coating, then, G90 galvanized steel is the recommended minimum level, AZ50 Galvalume is the recommended minimum level. If the transparent surface finishing or coating applied when the recommended level of Galvalume AZ 55.
There are other metals can be used, such as aluminum, copper, zinc, stainless steel and tin-lead alloy. Aluminum is mainly used for the purpose of preservation and use of its malleability, can be processed into a fine wood grain tile effect of the product. The roof is always made of aluminum coated or anodized to obtain a special color and better durability. Copper, zinc and stainless steel more for no coating applications. Copper is mainly the use of its good durability and rich features aeruginous. Zinc is also used for preservation purposes as well as its malleability, low-gloss gray appearance. Stainless steel is used to obtain long-lasting, shiny silver appearance or to meet specific corrosive environment.
4 Product Compatibility
Metal roof construction, according to the electrochemical point of view, the system used in all materials must be compatible, otherwise, and even between different metals and other materials will occur between electrolysis and corrosion. This includes fixtures, flashings, gutters and adjacent wall materials, they must be compatible or avoid contact.
As mentioned above, for aesthetic, many of the metal surface has a coating or overlay. There are several coatings, including acrylic, polyester, silicone polyester, and polyvinylidene fluoride (PVDF). PVDF coatings are registered trade name of Kynar and Hvlar, they are always in shape before the coated metal roof on. More durable coating also includes color fastness and anti-powdering performance, this - point, negotiate with customers is very important.
Familiar with the coatings industry knows that the most difficult to fade the pigment is an inorganic ceramic pigments, organic pigments expensive than the use of such inorganic pigment paint pigment than good. PVDF coating used to improve viscosity of the resin coating is a fluoride, can produce a strong molecular bond will firmly grasp the paint to prevent chalking. Some modulus metal tile is applied later in forming the coating, known as "coated", will help to ensure that the process of being stretched in the shape of the metal surface to get adequate coverage. The most common type is coated stone cladding, there will be ceramic bonded to the steel surface of the stone surface. The other is applied in the molding powder coating the board, common with PVDF powder coatings. These coatings make the products with a variety of textures and colors.
Dedicated to improving the metal coating on the durability of metal roofing, steel roofing products in particular, coated with high-quality coatings to protect against climate grass-roots level, to make products with the durability of a method. In addition, metal roofing system and many other advantages.
5 Advantages
One of the advantages of metal shore side is light weight - like aluminum tile roof weighs only 4.84 kg / m2, stone cladding tile roof is 16.15kg/m2, significantly lower than other roofing materials such as fiberglass shingles is 25 .8 ~ 40 4kg/m2. As the light weight, this product can be used in the original roof, applied to reduce the weight on the roof structure.
In addition, the interlock metal roofing system features or non-interlock between the metal plate and the roof fixed and the fixed nature of most metal roofing system that has a good expose of the wind. In many cases, the product can be achieved UL 580 "Standard Roof Wind exposing test" under the UL 90 level or UL1897 "wind exposed roof covering system standards" requirement.
High wind exposing the metal roofing is the place to be given priority in many a reason, but in some places the use of the system is to use its fire resistance. In fact, the last 1960s and 1970s in the United States some of the favorite places with shingles, vinyl tile on the use of aluminum and steel roofing products as fire. Over the past few decades the use of various types of metal roofing is a lot out of this consideration.
2003 International Building Code requirements for fire performance of roofing systems should be tested, but does not include steel and copper tile (board) roof, taking into account their inherent good fire performance. Of course, the metal roof during the pre-construction best check what the local building codes.
Another advantage of the metal system is above the coating allows it to be "cool" roofing system. Metal roof coating on the surface will not be set because of its smooth gray, more often than in the porous or rough coating on the surface of roofing materials can be longer and the light color to keep clean. Owners from time to time with clean water rinse. In addition, for most of the coating on the metal roof with high radiation, according to the different coatings, the radiation rate of 0.75 minimum, maximum up to 0.95, so the roof to absorb heat quickly release back to the atmosphere.
As technology advances, many metal roofing products with a coating of infrared reflecting pigments to add these specially treated pigments, even in dark colors can also have very high solar reflective performance. For example, non-reflective surface of the metal coating of dark brown total solar reflectance of only 6% to 8%, reflecting pigments added, the total solar reflectance can be increased to 25% to 30% or even higher. This meets the government agencies and public sector of the "cold" roof reflectivity requirements of the initial value.
In addition, the metal roof system design and cushion between the metal roof or metal and the air space between the stationary set, heat conduction through the suspension to further improve energy efficiency. Florida Solar Energy Center in accordance with the test, and the use of traditional roofing materials, many of the traditional metal tile roof in imitation of the still air of the attic space so that the heat is reduced by 30% or more of a factor. For laying the battens on the modulus of the product, and standing seam metal roofing products, it is still possible through a ventilation space to further improve energy efficiency.
Another advantage of metal products in the recycled material content. Most steel used in metal roofing with 25% to 35% recycled materials. Non-ferrous metals such as aluminum, copper, recycled material content of up to 95%.
Metal roofing is a major environmental factor in the sustainability of its excellent durability reduces the future consumption of raw materials. The life of metal roofing system and related products used. Uncoated steel roofing can last 20 to 30 years, plus a longer coating life. Have a coating or to the original stone cladding of the roof systems often guarantee period of up to 30 to 50 years, and re-applied coating life can be extended. Life even after the arrival of metal roofing can also be 100% recycling.
Most metal roofing easy to bend, to adapt to the unconventional form of roof design, including circular, oval and with a convex curve of the roof. For standing seam metal roofing system, many manufacturers offer matching wedge, narrow bottom width to accommodate the circular roof top needs, as well as curved concave or convex panels for the rafters.
Other hand, the modulus of the metal roofing panels have different ways to adapt to the special roof. Many tile cross-section is curved, for a round roof. In addition, 381 mm or less exposed some of the module board is very easy for most of the roof curve. Of course, the most fundamental thing is to get the manufacturer's information and help to decide how to live doing the best.
6 Annex
Although some form of special needs of custom sheet metal roofing and flashing, but residential metal roofing manufacturers to provide a wide range of standardized accessories available for the eaves, gables, roof drains, roof and wall slope changes and roof junction . In some cases, the manufacturer may also provide on-site production of attachments drawings. Many residential roof detail, including the rain dripping from the roof oriented along the tank.
On the standing seam roof system, the bottom edge of each piece of board or drip edge pieces around the starting roll. Standing seam roof panels with a clip and grip, and then secure the upper plate. For the vertical plate through a fixed and certain parts can not be locked into the starting tile-shaped plate, the manufacturer will usually provide sealing of the roof and finally fixed with detailed steps.
There are several methods of disposal gable, usually depends on roof shape. Roof gutters are three basic forms, used in conjunction with a variety of metal roofing: flat discoid drains, l or 2 drain pan so that the roof water and drain (open valley).
The disposal of the roof there are several methods. Most vertical plate with long roof and ridge cap - as long 3 m or 4 m.
Wall, roof slope changes and the transfer of processing often requires on-site production of the pan of water to meet the roof shape. Manufacturers recommend some form of pan-water, in the small bending machine or metal working shop in the local production. Skylights and chimneys often need a special pan of water, some well-known brand manufacturers provide supporting pan of water.
For skylights and chimneys important to remember that should not be overly dependent on sealant. Although the need for the appearance of the sealant, waterproofing can be used as auxiliary means, but any metal roof system flashings the first line of defense should be a pan of water itself. Sealant and the cushion is just an additional waterproofing measures.
Skylight in the roof should be done on the circle, so that the roof height was significantly higher than the metal plate. Whenever possible, the chimney at the pan of water should be embedded in masonry structure. Roof wall junction should be inserted or pan of water out into the wall up.
Attic ventilation and plumbing requirements shall be the manufacturer's construction. Metal roofing system designed specifically for the Pan-there are many kinds of water, sometimes even the color can be very well equipped.
Of course, experienced roofing contractor knows, when you think you have met all of the roof when a new issue again. It should be remembered, flashing the basic principle is to design the water is always in the top surface of the plate movement. Good design often pan of water under the roof auxiliary water channel, in order to increase water reliability. Another point is not to make the roof of garbage, leaves, snow and ice blocking the water path. In addition, the design of special flashings should consult the manufacturer or to the roof construction metal roof reference NRCA Manual (The NRCA Architectural SheetMetal and MetalRoofine Manu al).
7 Ventilation
Roof ventilation manufacturers recommended practices, which may include proprietary products and markets for sale of roof ventilation products. Many vertical slit through the use of ventilation products, closed with a specially made so that air can flow between the ribs on the roof, eaves care pull air as the air inlet.
Many people have a wrong perception that metal roofing systems need to increase attic ventilation. In fact, no matter what kind of attic ventilation is critical in roofing materials, metal, and use of the system have not the slightest change. In the choice of roof ventilation should also be considered when. Must remember that the amount of condensation generated warm air and cold as the result of surface contact. Attic ventilation is designed to eliminate the chance of condensation.
8 Construction
Residential metal roofing system to be set up cushion on the grounds that: the system in the roof structure during construction to keep dry; an additional waterproofing means; make condensation occurred in the plate on the back, to avoid the damp grass roots roof.
Although, 30 years shingle roofing mat is a standard option, but now contractors have turned to the synthesis of new lighter materials, so that each volume covers the area more. Of course, there are requirements specification, can also use self-adhesive cushion. The surface of these products are smooth, without granules and thus will not damage the metal plate on the back.
Also, in most of the metal to be careful walking on the roof. Roofing contractor to the owner shows how to walk on the safer, better able to leave a written guide. Walking on the steep roof, no matter what material is a challenge, metal roofing is no exception. In many cases, the fixed ladder on the roof, then support and ladder access aisle board composition.
Most manufacturers offer various forms of construction training.
In the past, metal roofing for residential purposes, property owners and contractors, lack of training, lack of awareness is a major obstacle to the promotion of this roof, and now the situation has greatly improved.
订阅:
博文 (Atom)