Magnesium manganese metal roofing system design needs to consider several aspects Author: lixuecom Tags: magnesium alloy magnesium manganese manganese manganese upright roof-magnesium aluminum-magnesium manganese system 2010-04-15 01:21 Thursday sunny.
Magnesium manganese metal roof Manganese stone coated metal roof load-bearing Al-Mg Withstand construction loads, rain, dust, snow pressure, maintenance load. Magnesium manganese metal roof plate load-bearing performance and the cross-sectional characteristics, the strength of the material thickness, the force transmission means, purlins (Vice purlin) spacing on. Wind pressure Local maximum wind pressure resistance, magnesium manganese metal roof will not be pulled off the negative air pressure. Wind resistance with aluminum-magnesium and manganese metal roof bracket of the buckle together, the bracket density. Noise Reached from the outside to prevent the sound from the indoor or outdoor indoor spread. Manganese in magnesium metal roofing insulation layer of fill material (usually cotton as insulation), the effect of noise level in magnesium manganese metal roof on both sides of the sound intensity difference in decibels. Sound insulation and sound insulation material density, thickness. It should be noted: insulation material for different frequencies of sound barrier effect is not the same. Seepage To prevent rainwater infiltration from the outside to the inside magnesium manganese metal roof. Rain water mainly through the gap or overlap the node into the aluminum-magnesium manganese metal roofing. Impervious to achieve the function, need to screw the mouth after using the gasket fixed with hidden, in the board's lap with sealant or welding process, it is best to use a long-pass plate to eliminate overlap, in a variety of node parts of the abdominal distension tight waterproofing treatment. Lightning To lead to ground lightning, thunder and lightning to prevent breakdown of magnesium manganese metal roof into the interior. Lighting Improve indoor lighting through skylights during the day, to save energy. Magnesium manganese stone coated steel roof in a specific location or arrangement of lighting glass lighting board should consider the life of roof metal roof with the coordination of magnesium manganese, magnesium and manganese in the metal roof skylights junction waterproofing treatment. Safety devices Manganese in magnesium metal roof with fixed security system to protect construction workers and maintenance personnel. Anti-icicle Rain and snow at the eaves to prevent icicles formed at. Beautiful Magnesium manganese metal roofing metal surface with good texture, pleasing color. Control thermal expansion and contraction Control the contraction of magnesium manganese metal roof displacement and direction. Ensure that the magnesium manganese metal roof in a large temperature difference between thermal expansion and contraction of the region will not have the stress and damage. Insulation Prevent the heat in the aluminum-magnesium manganese metal roof on both sides of transmission of the indoor temperature stability. Insulating function by magnesium manganese metal fill insulation under the roof (commonly used with glass wool, rock wool) to achieve the insulation effect to the U-value, the unit is W/M2K. Insulation by the following factors: cotton insulation materials, density, thickness; insulation cotton humidity, magnesium and manganese metal roof substructure connections (to prevent "cold bridge" phenomenon); magnesium manganese layer of metal roofing repeated heat radiation capability. Sound-absorbing Reduce the reflection of sound and reduce echo chamber. Sound-absorbing function of magnesium by manganese in the bottom of the stone coated steel roof were laid sound-absorbing cotton and punching on the floor to achieve. Magnesium manganese metal roof of the acoustic properties of the sound absorption coefficient a that. Moistureproof Prevent the underlying aluminum-magnesium and manganese metal roofing metal roofing aluminum magnesium manganese layer water vapor condensation to drain away the layer of aluminum-magnesium manganese metal roof water vapor. Manganese in the magnesium solution is filled with metal roofing insulation layer cotton, capped with aluminum-magnesium manganese metal roof home floor waterproof membrane, magnesium manganese metal roof can be ventilated on the node. Fireproof Magnesium manganese when the fire will not burn metal roofing materials, flame does not penetrate the aluminum-magnesium manganese metal roof. Ventilation Indoor and outside air exchange. Manganese in magnesium metal roof vents on the set. Anti-avalanche Manganese and magnesium in the snow region setting block snow on metal roof railing, to prevent the sudden snow fall. Pollution Magnesium manganese metal roofing material will not cause environmental pollution, 100 per cent recycled materials, recyclable, environmentally friendly. Light Pollution Magnesium manganesestone coated metal roof surface by coating or hammer handle, the elimination of light pollution generated by surrounding environment. Normal life Magnesium manganese metal roof life should be the same with the main building, such as 25 years, 50 years, 100 years. Maintain Magnesium manganese metal roofing in the lifetime of easy maintenance, lower maintenance costs. Cost Control magnesium manganese metal roof construction costs, the cost of the best metal roofing material.
all the information about stone coate steel roofing and other building materials.stone coated steel roof in african market.
2011年8月28日星期日
2011年8月22日星期一
-----------------
The main performance characteristics of the metal roofing which
Metal roof is the use of metal roof molding technology, the use of structural design and CAD computer-aided design, advanced detection methods, construction equipped with a reliable quality assurance. Because of its many unique properties, has been applied in different fields. The following details about the performance characteristics of the metal roof which.
A, no no purlin beams, open space, span of 8 ~ 36m arbitrary choice;
B, low cost, low investment;
C, design and construction cycle is short, 10000m2 roof construction 25 days to complete;
D, color galvanized steel, mechanical lock side connection, natural water, no leakage;
E, the overall scientific and reasonable structure, wind and seismic performance;
F, a variety of roof forms, giving the appearance of the building to the new;
G, by way of reasonable force, ready to design units to investors and provide structural stress analysis and node size.
edited by stone coated steel roofing tiles
The main performance characteristics of the metal roofing which
Metal roof is the use of metal roof molding technology, the use of structural design and CAD computer-aided design, advanced detection methods, construction equipped with a reliable quality assurance. Because of its many unique properties, has been applied in different fields. The following details about the performance characteristics of the metal roof which.
A, no no purlin beams, open space, span of 8 ~ 36m arbitrary choice;
B, low cost, low investment;
C, design and construction cycle is short, 10000m2 roof construction 25 days to complete;
D, color galvanized steel, mechanical lock side connection, natural water, no leakage;
E, the overall scientific and reasonable structure, wind and seismic performance;
F, a variety of roof forms, giving the appearance of the building to the new;
G, by way of reasonable force, ready to design units to investors and provide structural stress analysis and node size.
edited by stone coated steel roofing tiles
Construction and energy
Metal roof photovoltaic system for energy-saving California winery add luster
Rodney Strong Vineyards in California, Sonoma County, and the vineyards of the output of juice (this word pun, both the "juice" in Italian, can be interpreted as "electric energy", translated as suggested here: " essence ") is not derived from some vines, but thanks to the sun nurtured here.
California sunlight gave birth to high-quality grapes, the vineyards of wine brought honor to Strong, but visitors might not notice, it is these sun also for road lighting and winery facilities provide a large number of refrigeration systems energy.
In the winery warehouse roof metal plate installed on the 766 080-watt crystalline photovoltaic (hereinafter referred to as pv) power generation system is expected to provide 30% of the electricity needs of the vineyards.
The system consists of California Berkeley's PowerLight Corporation installed, containing 4032 pv modules, covering 100,000 square feet winery half of the roof. Each module produces 190 watts power. PowerLight Corporation is the largest construction of a straight seam metal roofing in a gentle slope on the pv projects.
In April last year to start planning the system, from the initial cost, government discounts, generating capacity, return on investment projections to the construction of logistics in all aspects of the study. In September, the winery and PowerLight Corporation reached a consensus and signed a contract. In the next eight weeks to complete the project design, pouring a concrete pad is good, and solar modules shipped to the construction site. All materials are available, it only took less than five weeks, the entire system is installed in place.
General interest in the construction of such a problem, that does not destroy the material and the roof closed at the same time, how to pv module installed standing seam metal roof. Called S-5-U's new fixed-roof technology provides a solution for this. The technology of the fixture by the Colorado Springs, Colorado, the company customized according to customer needs. Although the installation has more than 10,000 single fixed point, but this fixture in its annex (Round brake bolt) under the coordination of the Galvalume steel roof has a hole on the need.
The pv with standing seam stone coated metal roof system that combines the concept is increasingly widely accepted, and this concept has been a reasonable explanation. Roof plate film pv systems often need to be replaced before the end of life, and standing seam roof is precisely to overcome this shortcoming, and crystal module because it has the same life.
In addition due to the high reflective metal roof, this roof system installed pv ultimately proved to be a cooling effect of the roof. Pv module installed in the roof a few feet away from high places, so that the metal roofing is in its shadow, while between the formation of an air ventilation system. U.S. Department of Energy Oak Ridge National Laboratory study shows that, due to shadowing effects and the ventilation system air flow, the temperature of the roof can be reduced 65F, so as to reduce the burden of cooling the building.
The combination of metal roofing and pv system can make the roof of the net weight per square foot less than 3.5 pounds, the support structure and thereby reducing the cost of board design.
Despite Strong winery pv system cost $ 4.3 million, but the California public utility commissions to provide $ 2.1 million as an incentive, so Strong winery only take $ 2.2 million. In the government's tax incentives, the costs will be easier to accept. So whether from environmental or economic point of view from California wineries such new energy are reasonable.
Legend: Installation in California's Rodney Strong Vineyards Sonoma County on the roof of the more than 4,000 solar panels, give the vineyard to provide 30 percent of its electricity needs. Thus brought about shadows and forced ventilation can reduce the roof temperature 56F, thereby reducing the internal cooling load (above). Each board has four fixed points, with the S-5-U clamp (see insert map) they are fixed in the seam metal roof on the stand, so you do not have a hole in the roof.
Rob M. Haddock Colorado Springs, Colorado Consulting Group Ltd, head of the metal roof, metal roof technology experts and trainers. He is a national roofing contractor ASTM Committee members Systems Construction Association, Metal Construction Association.
edited by stone coated steel roofng tiles
Metal roof photovoltaic system for energy-saving California winery add luster
Rodney Strong Vineyards in California, Sonoma County, and the vineyards of the output of juice (this word pun, both the "juice" in Italian, can be interpreted as "electric energy", translated as suggested here: " essence ") is not derived from some vines, but thanks to the sun nurtured here.
California sunlight gave birth to high-quality grapes, the vineyards of wine brought honor to Strong, but visitors might not notice, it is these sun also for road lighting and winery facilities provide a large number of refrigeration systems energy.
In the winery warehouse roof metal plate installed on the 766 080-watt crystalline photovoltaic (hereinafter referred to as pv) power generation system is expected to provide 30% of the electricity needs of the vineyards.
The system consists of California Berkeley's PowerLight Corporation installed, containing 4032 pv modules, covering 100,000 square feet winery half of the roof. Each module produces 190 watts power. PowerLight Corporation is the largest construction of a straight seam metal roofing in a gentle slope on the pv projects.
In April last year to start planning the system, from the initial cost, government discounts, generating capacity, return on investment projections to the construction of logistics in all aspects of the study. In September, the winery and PowerLight Corporation reached a consensus and signed a contract. In the next eight weeks to complete the project design, pouring a concrete pad is good, and solar modules shipped to the construction site. All materials are available, it only took less than five weeks, the entire system is installed in place.
General interest in the construction of such a problem, that does not destroy the material and the roof closed at the same time, how to pv module installed standing seam metal roof. Called S-5-U's new fixed-roof technology provides a solution for this. The technology of the fixture by the Colorado Springs, Colorado, the company customized according to customer needs. Although the installation has more than 10,000 single fixed point, but this fixture in its annex (Round brake bolt) under the coordination of the Galvalume steel roof has a hole on the need.
The pv with standing seam stone coated metal roof system that combines the concept is increasingly widely accepted, and this concept has been a reasonable explanation. Roof plate film pv systems often need to be replaced before the end of life, and standing seam roof is precisely to overcome this shortcoming, and crystal module because it has the same life.
In addition due to the high reflective metal roof, this roof system installed pv ultimately proved to be a cooling effect of the roof. Pv module installed in the roof a few feet away from high places, so that the metal roofing is in its shadow, while between the formation of an air ventilation system. U.S. Department of Energy Oak Ridge National Laboratory study shows that, due to shadowing effects and the ventilation system air flow, the temperature of the roof can be reduced 65F, so as to reduce the burden of cooling the building.
The combination of metal roofing and pv system can make the roof of the net weight per square foot less than 3.5 pounds, the support structure and thereby reducing the cost of board design.
Despite Strong winery pv system cost $ 4.3 million, but the California public utility commissions to provide $ 2.1 million as an incentive, so Strong winery only take $ 2.2 million. In the government's tax incentives, the costs will be easier to accept. So whether from environmental or economic point of view from California wineries such new energy are reasonable.
Legend: Installation in California's Rodney Strong Vineyards Sonoma County on the roof of the more than 4,000 solar panels, give the vineyard to provide 30 percent of its electricity needs. Thus brought about shadows and forced ventilation can reduce the roof temperature 56F, thereby reducing the internal cooling load (above). Each board has four fixed points, with the S-5-U clamp (see insert map) they are fixed in the seam metal roof on the stand, so you do not have a hole in the roof.
Rob M. Haddock Colorado Springs, Colorado Consulting Group Ltd, head of the metal roof, metal roof technology experts and trainers. He is a national roofing contractor ASTM Committee members Systems Construction Association, Metal Construction Association.
edited by stone coated steel roofng tiles
2011年8月21日星期日
Do metal roofing how to design the future of this line?
Views: 1387 times Tags: 20 | solve time :2007-9-6 10:46 | Tags: cold rain under
Mainly to do exhibitions, airports, stadiums and other metal roofing design, the company sold the metal roof panels, to provide customers with a complete metal roofing solutions, we do technical support, the program plans to do metal roofing and construction design, development prospects ? ? Treatment standards? (Specific salary?) In which direction? Selling products such as technical support will not do the company's dependence on large, will come to work in more limited? In addition, and curtain wall industry (curtain wall design) comparison, which is more promising? Which treatment better? Eager to answer the know! Thank you! !
The answer, of course, the best design would be good to do, you are doing is Convention Center \ airport \ gymnasium in this category, you should look at the situation in China now is a better industry, China is to speed the development of ultra-some of the infrastructure for a higher, you design this area is to do (technical) countries now demand for this type of talent is great, of course, promising prospects, treatment generally monthly salary of 6,000 yuan or more, if you just engaged in this work may be less but at least are more than 3,000 yuan, which is good, this year's graduates (general) in the northeast old industrial bases in a career fair are copy 1000,!!
Design development is, of course, you have this foundation!! Screen boom industry of course will not better than you now, just because it was just a wall, but you design a house, you want to look like a !!
I wish you a successful career!!!
edited by stone coated steel roof
edited by stone coated steel roof
2011年8月20日星期六
Metal roof tile construction techniques
A pre-construction preparation
1) primary: primary metal tile applied on top of any roofing material.
2) require the use of dry wood keel timber (metal), size 30mm × 25mm, the surface shall be treated with preservatives.
3) tools to prepare: a hammer, tape measure, fountain, electric drills, saws, bending machines move.
4) Supplementary materials: sealants, riveting firmware, nails.
Second, the construction process:
(A) the installation of battens
1, according to put away the wooden keel row layout, the width of 30mm, 25mm high wooden fixed in the cement along the side on the grass-roots level (downstream), the required distance is not
Greater than 600mm, depth of not less than riveting into grassroots 30mm. Installed downstream of the screw is located on the downstream of the battens, the level should be a pick a direction
Root to maintain continuous, and only in the gutter off the roof on both sides of the line of control; spacing 368 mm
2, to ensure that battens on a flat surface, install the battens, the battens may be the next step up in different small wooden wedge, to adjust the battens surface roughness;
3, the metal roof, mountain wall, herringbone border outside the office, to meet the income side of the ridge tile and metal installation requirements, the wooden keel height increased 40mm;
4, vertical lightning rod battens can be installed in the same time, complement each other.
(B) the acceptance battens:
1, material inspection: to be embalmed after the difficulty of drying the wood or the deformation of the corresponding specifications of the metal.
2, size acceptance: battens cross-section size of 30mm × 25mm, error of ± 3mm.
3, the arrangement pitch Acceptance: In addition to both sides of the cornice at the roof and spaced less than 368mm battens, the battens of the standard spacing of 368mm.
4, the flatness of the inspection: for each roof battens pull, and error detection level, allowing the error 5mm.
5, stability and acceptance: Check for loose battens, with the grass roots are firmly connected.
(C) the installation of metal roofing
1, the metal roofing tiles on battens fixed to the fixed way for the level of metal nails nail set (see photo) requires less than 5 per tile, fixation,
Inserted into the battens is not less than 20mm
edited by stone coated metal roof tiles
2011年8月11日星期四
2011年08月11日
标签: 杂谈 |
titanium-zinc sheet metal roof, titanium-zinc roof - [Metal Roofing] titanium zinc panels are zinc and copper and titanium alloys, which composition does not contain iron, so it will not rust. After passivation the future, it will form a layer of light gray surface oxide layer, a layer of the building to provide effective and lasting protection. Widely used in public buildings (especially the landmarks), such as Airport, convention centers, cultural centers, sports stadiums, senior housing, office buildings of the roof.
Titanium zinc roof has the following advantages can be:
1. Durability: titanium-zinc sheet roof even in heavily polluted areas can still have a long life. To 0.7mm thick, for example, construction of properly designed roof life of at least 100 years. Europe and the United States of zinc sheet metal roof with a few hundred years of history, and now, due to the addition of titanium, zinc plate durability of modern and better.
2. Adaptability: titanium-zinc plate that is tough but also a high degree of extension, but also easy to be bent and welded on site, so for a variety of shapes architectural style. The weldability of complex shapes and to ensure the realization of the node; its scientific seams protect the roof system in the storm, when the roof of a larger three-dimensional deformation of the case is not leaking;
3. Maintenance: no maintenance, no color, gray tone throughout the life of the building; because of its unique self-healing properties, has even scratched the surface without any maintenance, it can in a short time restitution.
......
Titanium-zinc sheet metal roofingsystem is established through the use of edge and bite of professional equipment, along the strip length will be two panels up side to bite, which will connect the roof or wall as a whole. System does not require gluing, sewing, especially two-way captive and 100% of the structural waterproofing.
edited by stone coated steel roofing
Titanium zinc roof has the following advantages can be:
1. Durability: titanium-zinc sheet roof even in heavily polluted areas can still have a long life. To 0.7mm thick, for example, construction of properly designed roof life of at least 100 years. Europe and the United States of zinc sheet metal roof with a few hundred years of history, and now, due to the addition of titanium, zinc plate durability of modern and better.
2. Adaptability: titanium-zinc plate that is tough but also a high degree of extension, but also easy to be bent and welded on site, so for a variety of shapes architectural style. The weldability of complex shapes and to ensure the realization of the node; its scientific seams protect the roof system in the storm, when the roof of a larger three-dimensional deformation of the case is not leaking;
3. Maintenance: no maintenance, no color, gray tone throughout the life of the building; because of its unique self-healing properties, has even scratched the surface without any maintenance, it can in a short time restitution.
......
Titanium-zinc sheet metal roofing
edited by stone coated steel roofing
2011年7月25日星期一
Residential metal roofing system fstl.tuliaoren.com :2010 -01-03 paint net paint Lecture [Chinese] Abstract: In some areas, such as coastal and mountainous areas, the use of metal roofing system is more common than in the past. Metal Roofing Association (MRA) is expected, metal roofs in the residential roofing market share each year will be 20% to 25% growth rate. Perhaps the most fundamental is to clarify the different metal roofing products ...
In today's highly competitive roofing market, a contractor to be successful in the professional and quality must go in front, for example, to correctly select the roofing systems and products. Residential metal roofing system is good? Kinds of programs, will help to improve the status of contractors in the competition.
In recent years, residential metal roofing products in terms of applications has increased. In some areas, such as coastal and mountainous areas, the use of metal roofing system is more common than in the past.
Residential metal roof system
Experience shows that in the climate extremes, increasing use of metal roofing. Metal Roofing Association (MRA) is expected, metal roofs in the residential roofing market share each year will be 20% to 25% growth rate.
To achieve this goal, the metal roofing industry must continue to focus on improving the user's awareness, but also must increase efforts to roofing contractors and distributors of commercial products and their use for training. Perhaps the most fundamental is to clarify the different metal roof products as well as the difference between these differences in a successful meet the requirements of owners of metal roofing systems in the role.
An application for residential metal roofing is a mistake to think that the majority of roofing for new construction. In fact, NRCA annual market survey, 2004, 11 percent of residential metal roofing for new, renovation of 56%, 11% for the maintenance and repair.
Visible, more for the refurbishment of the metal roof, one of the reasons is that many metal roofing products can be laid on the existing roof, as well as some variety of standing seam metal tile products. Commercially available product variety and often people will do a muddle.
In North America, with over 100 vinyl tile, imitation shingles, slate and clay tile, concrete tile and other tile materials. Because each product is the exclusive production and sales, and not interoperable.
To ensure correct construction and application is necessary to understand some of the products of knowledge. 2 products in the decision to form a metal roofing system, it is necessary to choose the roof slope and geometry of the product.
For example, most of the roof tile products for the minimum slope of 3 / 12. The low sloping roof, the main use of on-site mechanical or hand joints standing seam panels, such as "double-lock" or "Three Rings" board.
Modulus products are mostly interlocking panels, ranging in size from 203 mm × 305mm to 610mm × 914 mm. This roofing system approach to a variety of thermal expansion and contraction problems.
Some used in the construction or expansion of sliding clip, when the thermal expansion board "floating" up; some products are designed with the use of the board, "folding" effect, the equivalent of S-shaped plate can withstand thermal expansion and contraction of many fold. Such products can be made into imitation or imitation slate glass tile, vinyl tile, and other imitation Tongwa or flat tile.
Stiffness of these products exist in the metal plate and with the space between the grassroots so that they can be self-connected in the renovated shop in the existing roof. In fact, such systems can even through the use of wood or tile shop in a special fixation on the shingle.
In addition to the special form of modulus board, there are many products available for residential vertical seam. These products from the shop to the house along the roof, and rafters or parallel or perpendicular.
Vertical seam roofing products include a variety of fixed waveforms through standing seam panels and products. Penetrate the roof panels have a variety of standard length, laying horizontal seams and ends with the overlap can also be broken in the field size to avoid the end of the lap.
The length of standing seam products are generally customized to meet the actual size of the roof. All vertical joints in laying a key factor when products must understand that the manufacturer is required on board laid on the slats or solid board.
Although these products are initially laid on the slats, but are often applied in agriculture manufacturer of solid board and asked to use the cushion. Penetration of fixed or fixed-length standing seam roofing products, safe transportation is very important, because sometimes board up to 8 m long or even longer.
To avoid such a transportation problem, sometimes the pressure-type machine can be moved into the field production. Even so, the board still need to be careful on-site transport and require specialized knowledge, because many board is shipped upright.
3 discussed above, various types of metal roofing product metal can be made of different metals to achieve specific effects and features. MRA survey of metal roofing products with the main material is steel, there are two forms, galvanized and Galvalume.
Galvanized steel zinc plated to improve corrosion resistance, Galvalume coated steel alloy, is also for preservation purposes. Both have a variety of steel grades.
Classification is based on both sides of the steel-plated zinc or aluminum coating thickness determined. Metal Construction Association, in accordance with quality standards, if the metal surface coating, then, G90 galvanized steel is the recommended minimum level, AZ50 Galvalume is the recommended minimum level.
If the transparent surface finishing or coating applied when the recommended level of Galvalume AZ 55. There are other metals can be used, such as aluminum, copper, zinc, stainless steel and tin-lead alloy.
Aluminum is mainly used for the purpose of preservation and use of its malleability, can be processed into a fine wood grain tile effect of the product. The roof is always made of aluminum coated or anodized to obtain a special color and better durability.
Copper, zinc and stainless steel more for no coating applications. Copper is mainly the use of its good durability and rich features aeruginous.
Zinc is also used for preservation purposes as well as its malleability, low-gloss gray appearance. Stainless steel is used to obtain long-lasting, shiny silver appearance or to meet specific corrosive environment.
4 Product Compatibility metal roof construction, according to the electrochemical point of view, the system used in all materials must be compatible, otherwise, and even between different metals and other materials will occur between electrolysis and corrosion. This includes fixtures, flashings, gutters and adjacent wall materials, they must be compatible or avoid contact.
As mentioned above, for aesthetic, many of the metal surface has a coating or overlay. There are several coatings, including acrylic, polyester, silicone polyester, and polyvinylidene fluoride (PVDF).
PVDF coatings are registered trade name of Kynar and Hvlar, they are always in shape before the coated metal roof on. More durable coating also includes color fastness and anti-powdering performance, this? Point, negotiate with customers is very important.
Familiar with the coatings industry knows that the most difficult to fade the pigment is an inorganic ceramic pigments, organic pigments expensive than the use of such inorganic pigment paint pigment than good. PVDF coating used to improve viscosity of the resin coating is a fluoride, can produce a strong molecular bond will firmly grasp the paint </ p>
? Prevent chalking. Some modulus metal tile is applied later in forming the coating, known as "coated", will help to ensure that the process of being stretched in the shape of the metal surface to get adequate coverage.
The most common type is coated stone cladding, there will be ceramic bonded to the steel surface of the stone surface. The other is applied in the molding powder coating the board, common with PVDF powder coatings.
These coatings make the products with a variety of textures and colors. Dedicated to improving the metal coating on the durability of metal roofing, steel roofing products in particular, coated with high-quality coatings to protect against climate grass-roots level, to make products with the durability of a method.
In addition, metal roofing system and many other advantages. 5 Advantages One of the advantages of metal shore side is light weight? Like aluminum tile roof weighs only 4.84 kg / m2, stone cladding tile roof is 16.15kg/m2, significantly lower than other roofing materials such as fiberglass shingles of 25.8 ~ 40 4kg/m2.
As the light weight, this product can be used in the original roof, applied to reduce the weight of the roof structure. In addition, the interlock metal roofing system features or non-interlock between the metal plate and the roof fixed and the fixed nature of most metal roofing system that has a good expose of the wind.
In many cases, the product can be achieved UL 580 "Standard Roof Wind exposing test" under the UL 90 level or UL1897 "wind exposed roof covering system standards" requirement. High wind exposing the metal roofing is the place to be given priority in many a reason, but in some places the use of the system is to use its fire resistance.
In fact, the last 1960s and 1970s in the United States some of the favorite places with shingles, vinyl tile on the use of aluminum and steel roofing products as fire. Over the past few decades the use of various types of metal roofing is a lot out of this consideration.
2003 International Building Code requirements for fire performance of roofing systems should be tested, but does not include steel and copper tile (board) roof, taking into account their inherent good fire performance. Of course, the metal roof during the pre-construction best check what the local building codes.
Another advantage of the metal system is above the coating allows it to be "cool" roofing system. Metal roof coating on the surface will not be set because of its smooth gray, more often than in the porous or rough coating on the surface of roofing materials can be longer and the light color to keep clean.
Owners from time to time with clean water rinse. In addition, for most of the coating on the metal roof with high radiation, according to the different coatings, the radiation rate of 0.75 minimum, maximum up to 0.95, so the roof to absorb heat quickly release back to the atmosphere.
As technology advances, many metal roofing products with a coating of infrared reflecting pigments to add these specially treated pigments, even in dark colors can also have very high solar reflective performance. For example, non-reflective surface of the metal coating of dark brown total solar reflectance of only 6% to 8%, reflecting pigments added, the total solar reflectance can be increased to 25% to 30% or even higher.
This meets the government agencies and public sector of the "cold" roof reflectivity requirements of the initial value. In addition, the metal roof system design and cushion between the metal roof or metal and the air space between the stationary set, heat conduction through the suspension to further improve energy efficiency.
Florida Solar Energy Center in accordance with the test, and the use of traditional roofing materials, many of the traditional metal tile roof in imitation of the still air of the attic space so that the heat is reduced by 30% or more of a factor. For laying the battens on the modulus of the product, and standing seam metal roofing products, it is still possible through a ventilation space to further improve energy efficiency.
Another advantage of metal products in the recycled material content. Most steel used in metal roofing with 25% to 35% recycled materials.
Non-ferrous metals such as aluminum, copper, recycled material content of up to 95%. Metal roofing is a major environmental factor in the sustainability of its excellent durability reduces the future consumption of raw materials.
The life of metal roofing system and related products used. Uncoated steel roofing can last 20 to 30 years, plus a longer coating life.
Have a coating or to the original stone cladding of the roof systems often guarantee period of up to 30 to 50 years, and re-applied coating life can be extended. Life even after the arrival of metal roofing can also be 100% recycling.
Most metal roofing easy to bend, to adapt to the unconventional form of roof design, including circular, oval and with a convex curve of the roof. For standing seam metal roofing system, many manufacturers offer matching wedge, narrow bottom width to accommodate the circular roof top needs, as well as curved concave or convex panels for the rafters.
Other hand, the modulus of the metal roofing panels have different ways to adapt to the special roof. Many tile cross-section is curved, for a round roof.
In addition, 381 mm or less exposed some of the module board is very easy for most of the roof curve. Of course, the most fundamental thing is to get the manufacturer's information and help to decide how to live doing the best.
6 Although some form of special accessories need custom sheet metal roofing and flashing, but residential metal roofing manufacturers offer a wide range of standardized accessories available for the eaves, gables, roof drains, roof and wall and roof slope change junction. In some cases, the manufacturer may also provide on-site production of attachments drawings.
Many residential roof detail, including the rain dripping from the roof oriented along the tank. On the standing seam roof system, the bottom edge of each piece of board or drip edge pieces around the starting roll.
Standing seam roof panels with a clip and grip, and then secure the upper plate.
For the vertical plate through a fixed and certain parts can not be locked into the starting tile-shaped plate, the manufacturer will usually provide sealing of the roof and finally fixed with detailed steps. There are several methods of disposal gable, usually depends on roof shape.
Roof gutters are three basic forms, used in conjunction with a variety of metal roofing: flat discoid drains, l or 2 drain pan so that the roof water and drain (open valley). The disposal of the roof there are several methods.
Most vertical plate with long roof and ridge cap? Long as 3 m or 4 m. Wall, roof slope changes and the transfer of processing often requires on-site production of the pan of water to meet the roof shape.
Manufacturers recommend some form of pan-water, in the small bending machine or metal working shop in the local production. Skylights and chimneys often need a special pan of water, some well-known brand manufacturers provide supporting pan of water.
For skylights and chimneys important to remember that should not be overly dependent on sealant. Although the need for the appearance of the sealant, waterproofing can be used as auxiliary means, but any metal roof system flashings the first line of defense should be a pan of water itself.
Sealant and the cushion is just an additional waterproofing measures. Skylight in the roof should be done on the circle, so that the roof height was significantly higher than the metal plate.
Whenever possible, the chimney at the pan of water should be embedded in masonry structure. Roof wall junction should be inserted or pan of water out into the wall up.
Attic ventilation and plumbing requirements shall be the manufacturer's construction. Metal roofing system designed specifically for the Pan-there are many kinds of water, sometimes even the color can be very well equipped.
Of course, experienced roofing contractor knows, when you think you have met all of the roof when a new issue again. It should be remembered </ p>
? Flashing basic design principle is to ensure water is always in the top surface of the plate movement. Good design often pan of water under the roof auxiliary water channel, in order to increase water reliability.
Another point is not to make the roof of garbage, leaves, snow and ice blocking the water path. In addition, the design of special flashings should consult the manufacturer or to the roof construction metal roof reference NRCA Manual (The NRCA Architectural SheetMetal and MetalRoofine Manu al).
7 roof ventilation ventilation manufacturers recommended practices, which may include proprietary products and markets for sale of roof ventilation products. Many vertical slit through the use of ventilation products, closed with a specially made so that air can flow between the ribs on the roof, eaves care pull air as the air inlet.
Many people have a wrong perception that metal roofing systems need to increase attic ventilation. In fact, no matter what kind of attic ventilation is critical in roofing materials, metal, and use of the system have not the slightest change.
In the choice of roof ventilation should also be considered when. Must remember </ p>
? Condensation of warm air and generation as the result of contact with cold surfaces. Attic ventilation is designed to eliminate the chance of condensation.
8 construction of residential metal roofing system to be set cushion reasons: to keep the roof structure during construction drying system; is an additional waterproofing means; make condensation occurred in the plate on the back, to avoid the damp grass roots roof. Although, 30 years shingle roofing mat is a standard option, but now contractors have turned to the synthesis of new lighter materials, so that each volume covers the area more.
Of course, there are requirements specification, can also use self-adhesive cushion. The surface of these products are smooth, without granules and thus will not damage the metal plate on the back.
Also, in most of the metal to be careful walking on the roof. Roofing contractor to the owner shows how to walk on the safer, better able to leave a written guide.
Walking on the steep roof, no matter what material is a challenge, metal roofing is no exception. In many cases, the fixed ladder on the roof, then support and ladder access aisle board composition.
Most manufacturers offer various forms of construction training. In the past, metal roofing for residential purposes, property owners and contractors, lack of training, lack of awareness is a major obstacle to the promotion of this roof, and now the situation has greatly improved.
edted by stone coated metal roof
In today's highly competitive roofing market, a contractor to be successful in the professional and quality must go in front, for example, to correctly select the roofing systems and products. Residential metal roofing system is good? Kinds of programs, will help to improve the status of contractors in the competition.
In recent years, residential metal roofing products in terms of applications has increased. In some areas, such as coastal and mountainous areas, the use of metal roofing system is more common than in the past.
Residential metal roof system
Experience shows that in the climate extremes, increasing use of metal roofing. Metal Roofing Association (MRA) is expected, metal roofs in the residential roofing market share each year will be 20% to 25% growth rate.
To achieve this goal, the metal roofing industry must continue to focus on improving the user's awareness, but also must increase efforts to roofing contractors and distributors of commercial products and their use for training. Perhaps the most fundamental is to clarify the different metal roof products as well as the difference between these differences in a successful meet the requirements of owners of metal roofing systems in the role.
An application for residential metal roofing is a mistake to think that the majority of roofing for new construction. In fact, NRCA annual market survey, 2004, 11 percent of residential metal roofing for new, renovation of 56%, 11% for the maintenance and repair.
Visible, more for the refurbishment of the metal roof, one of the reasons is that many metal roofing products can be laid on the existing roof, as well as some variety of standing seam metal tile products. Commercially available product variety and often people will do a muddle.
In North America, with over 100 vinyl tile, imitation shingles, slate and clay tile, concrete tile and other tile materials. Because each product is the exclusive production and sales, and not interoperable.
To ensure correct construction and application is necessary to understand some of the products of knowledge. 2 products in the decision to form a metal roofing system, it is necessary to choose the roof slope and geometry of the product.
For example, most of the roof tile products for the minimum slope of 3 / 12. The low sloping roof, the main use of on-site mechanical or hand joints standing seam panels, such as "double-lock" or "Three Rings" board.
Modulus products are mostly interlocking panels, ranging in size from 203 mm × 305mm to 610mm × 914 mm. This roofing system approach to a variety of thermal expansion and contraction problems.
Some used in the construction or expansion of sliding clip, when the thermal expansion board "floating" up; some products are designed with the use of the board, "folding" effect, the equivalent of S-shaped plate can withstand thermal expansion and contraction of many fold. Such products can be made into imitation or imitation slate glass tile, vinyl tile, and other imitation Tongwa or flat tile.
Stiffness of these products exist in the metal plate and with the space between the grassroots so that they can be self-connected in the renovated shop in the existing roof. In fact, such systems can even through the use of wood or tile shop in a special fixation on the shingle.
In addition to the special form of modulus board, there are many products available for residential vertical seam. These products from the shop to the house along the roof, and rafters or parallel or perpendicular.
Vertical seam roofing products include a variety of fixed waveforms through standing seam panels and products. Penetrate the roof panels have a variety of standard length, laying horizontal seams and ends with the overlap can also be broken in the field size to avoid the end of the lap.
The length of standing seam products are generally customized to meet the actual size of the roof. All vertical joints in laying a key factor when products must understand that the manufacturer is required on board laid on the slats or solid board.
Although these products are initially laid on the slats, but are often applied in agriculture manufacturer of solid board and asked to use the cushion. Penetration of fixed or fixed-length standing seam roofing products, safe transportation is very important, because sometimes board up to 8 m long or even longer.
To avoid such a transportation problem, sometimes the pressure-type machine can be moved into the field production. Even so, the board still need to be careful on-site transport and require specialized knowledge, because many board is shipped upright.
3 discussed above, various types of metal roofing product metal can be made of different metals to achieve specific effects and features. MRA survey of metal roofing products with the main material is steel, there are two forms, galvanized and Galvalume.
Galvanized steel zinc plated to improve corrosion resistance, Galvalume coated steel alloy, is also for preservation purposes. Both have a variety of steel grades.
Classification is based on both sides of the steel-plated zinc or aluminum coating thickness determined. Metal Construction Association, in accordance with quality standards, if the metal surface coating, then, G90 galvanized steel is the recommended minimum level, AZ50 Galvalume is the recommended minimum level.
If the transparent surface finishing or coating applied when the recommended level of Galvalume AZ 55. There are other metals can be used, such as aluminum, copper, zinc, stainless steel and tin-lead alloy.
Aluminum is mainly used for the purpose of preservation and use of its malleability, can be processed into a fine wood grain tile effect of the product. The roof is always made of aluminum coated or anodized to obtain a special color and better durability.
Copper, zinc and stainless steel more for no coating applications. Copper is mainly the use of its good durability and rich features aeruginous.
Zinc is also used for preservation purposes as well as its malleability, low-gloss gray appearance. Stainless steel is used to obtain long-lasting, shiny silver appearance or to meet specific corrosive environment.
4 Product Compatibility metal roof construction, according to the electrochemical point of view, the system used in all materials must be compatible, otherwise, and even between different metals and other materials will occur between electrolysis and corrosion. This includes fixtures, flashings, gutters and adjacent wall materials, they must be compatible or avoid contact.
As mentioned above, for aesthetic, many of the metal surface has a coating or overlay. There are several coatings, including acrylic, polyester, silicone polyester, and polyvinylidene fluoride (PVDF).
PVDF coatings are registered trade name of Kynar and Hvlar, they are always in shape before the coated metal roof on. More durable coating also includes color fastness and anti-powdering performance, this? Point, negotiate with customers is very important.
Familiar with the coatings industry knows that the most difficult to fade the pigment is an inorganic ceramic pigments, organic pigments expensive than the use of such inorganic pigment paint pigment than good. PVDF coating used to improve viscosity of the resin coating is a fluoride, can produce a strong molecular bond will firmly grasp the paint </ p>
? Prevent chalking. Some modulus metal tile is applied later in forming the coating, known as "coated", will help to ensure that the process of being stretched in the shape of the metal surface to get adequate coverage.
The most common type is coated stone cladding, there will be ceramic bonded to the steel surface of the stone surface. The other is applied in the molding powder coating the board, common with PVDF powder coatings.
These coatings make the products with a variety of textures and colors. Dedicated to improving the metal coating on the durability of metal roofing, steel roofing products in particular, coated with high-quality coatings to protect against climate grass-roots level, to make products with the durability of a method.
In addition, metal roofing system and many other advantages. 5 Advantages One of the advantages of metal shore side is light weight? Like aluminum tile roof weighs only 4.84 kg / m2, stone cladding tile roof is 16.15kg/m2, significantly lower than other roofing materials such as fiberglass shingles of 25.8 ~ 40 4kg/m2.
As the light weight, this product can be used in the original roof, applied to reduce the weight of the roof structure. In addition, the interlock metal roofing system features or non-interlock between the metal plate and the roof fixed and the fixed nature of most metal roofing system that has a good expose of the wind.
In many cases, the product can be achieved UL 580 "Standard Roof Wind exposing test" under the UL 90 level or UL1897 "wind exposed roof covering system standards" requirement. High wind exposing the metal roofing is the place to be given priority in many a reason, but in some places the use of the system is to use its fire resistance.
In fact, the last 1960s and 1970s in the United States some of the favorite places with shingles, vinyl tile on the use of aluminum and steel roofing products as fire. Over the past few decades the use of various types of metal roofing is a lot out of this consideration.
2003 International Building Code requirements for fire performance of roofing systems should be tested, but does not include steel and copper tile (board) roof, taking into account their inherent good fire performance. Of course, the metal roof during the pre-construction best check what the local building codes.
Another advantage of the metal system is above the coating allows it to be "cool" roofing system. Metal roof coating on the surface will not be set because of its smooth gray, more often than in the porous or rough coating on the surface of roofing materials can be longer and the light color to keep clean.
Owners from time to time with clean water rinse. In addition, for most of the coating on the metal roof with high radiation, according to the different coatings, the radiation rate of 0.75 minimum, maximum up to 0.95, so the roof to absorb heat quickly release back to the atmosphere.
As technology advances, many metal roofing products with a coating of infrared reflecting pigments to add these specially treated pigments, even in dark colors can also have very high solar reflective performance. For example, non-reflective surface of the metal coating of dark brown total solar reflectance of only 6% to 8%, reflecting pigments added, the total solar reflectance can be increased to 25% to 30% or even higher.
This meets the government agencies and public sector of the "cold" roof reflectivity requirements of the initial value. In addition, the metal roof system design and cushion between the metal roof or metal and the air space between the stationary set, heat conduction through the suspension to further improve energy efficiency.
Florida Solar Energy Center in accordance with the test, and the use of traditional roofing materials, many of the traditional metal tile roof in imitation of the still air of the attic space so that the heat is reduced by 30% or more of a factor. For laying the battens on the modulus of the product, and standing seam metal roofing products, it is still possible through a ventilation space to further improve energy efficiency.
Another advantage of metal products in the recycled material content. Most steel used in metal roofing with 25% to 35% recycled materials.
Non-ferrous metals such as aluminum, copper, recycled material content of up to 95%. Metal roofing is a major environmental factor in the sustainability of its excellent durability reduces the future consumption of raw materials.
The life of metal roofing system and related products used. Uncoated steel roofing can last 20 to 30 years, plus a longer coating life.
Have a coating or to the original stone cladding of the roof systems often guarantee period of up to 30 to 50 years, and re-applied coating life can be extended. Life even after the arrival of metal roofing can also be 100% recycling.
Most metal roofing easy to bend, to adapt to the unconventional form of roof design, including circular, oval and with a convex curve of the roof. For standing seam metal roofing system, many manufacturers offer matching wedge, narrow bottom width to accommodate the circular roof top needs, as well as curved concave or convex panels for the rafters.
Other hand, the modulus of the metal roofing panels have different ways to adapt to the special roof. Many tile cross-section is curved, for a round roof.
In addition, 381 mm or less exposed some of the module board is very easy for most of the roof curve. Of course, the most fundamental thing is to get the manufacturer's information and help to decide how to live doing the best.
6 Although some form of special accessories need custom sheet metal roofing and flashing, but residential metal roofing manufacturers offer a wide range of standardized accessories available for the eaves, gables, roof drains, roof and wall and roof slope change junction. In some cases, the manufacturer may also provide on-site production of attachments drawings.
Many residential roof detail, including the rain dripping from the roof oriented along the tank. On the standing seam roof system, the bottom edge of each piece of board or drip edge pieces around the starting roll.
Standing seam roof panels with a clip and grip, and then secure the upper plate.
For the vertical plate through a fixed and certain parts can not be locked into the starting tile-shaped plate, the manufacturer will usually provide sealing of the roof and finally fixed with detailed steps. There are several methods of disposal gable, usually depends on roof shape.
Roof gutters are three basic forms, used in conjunction with a variety of metal roofing: flat discoid drains, l or 2 drain pan so that the roof water and drain (open valley). The disposal of the roof there are several methods.
Most vertical plate with long roof and ridge cap? Long as 3 m or 4 m. Wall, roof slope changes and the transfer of processing often requires on-site production of the pan of water to meet the roof shape.
Manufacturers recommend some form of pan-water, in the small bending machine or metal working shop in the local production. Skylights and chimneys often need a special pan of water, some well-known brand manufacturers provide supporting pan of water.
For skylights and chimneys important to remember that should not be overly dependent on sealant. Although the need for the appearance of the sealant, waterproofing can be used as auxiliary means, but any metal roof system flashings the first line of defense should be a pan of water itself.
Sealant and the cushion is just an additional waterproofing measures. Skylight in the roof should be done on the circle, so that the roof height was significantly higher than the metal plate.
Whenever possible, the chimney at the pan of water should be embedded in masonry structure. Roof wall junction should be inserted or pan of water out into the wall up.
Attic ventilation and plumbing requirements shall be the manufacturer's construction. Metal roofing system designed specifically for the Pan-there are many kinds of water, sometimes even the color can be very well equipped.
Of course, experienced roofing contractor knows, when you think you have met all of the roof when a new issue again. It should be remembered </ p>
? Flashing basic design principle is to ensure water is always in the top surface of the plate movement. Good design often pan of water under the roof auxiliary water channel, in order to increase water reliability.
Another point is not to make the roof of garbage, leaves, snow and ice blocking the water path. In addition, the design of special flashings should consult the manufacturer or to the roof construction metal roof reference NRCA Manual (The NRCA Architectural SheetMetal and MetalRoofine Manu al).
7 roof ventilation ventilation manufacturers recommended practices, which may include proprietary products and markets for sale of roof ventilation products. Many vertical slit through the use of ventilation products, closed with a specially made so that air can flow between the ribs on the roof, eaves care pull air as the air inlet.
Many people have a wrong perception that metal roofing systems need to increase attic ventilation. In fact, no matter what kind of attic ventilation is critical in roofing materials, metal, and use of the system have not the slightest change.
In the choice of roof ventilation should also be considered when. Must remember </ p>
? Condensation of warm air and generation as the result of contact with cold surfaces. Attic ventilation is designed to eliminate the chance of condensation.
8 construction of residential metal roofing system to be set cushion reasons: to keep the roof structure during construction drying system; is an additional waterproofing means; make condensation occurred in the plate on the back, to avoid the damp grass roots roof. Although, 30 years shingle roofing mat is a standard option, but now contractors have turned to the synthesis of new lighter materials, so that each volume covers the area more.
Of course, there are requirements specification, can also use self-adhesive cushion. The surface of these products are smooth, without granules and thus will not damage the metal plate on the back.
Also, in most of the metal to be careful walking on the roof. Roofing contractor to the owner shows how to walk on the safer, better able to leave a written guide.
Walking on the steep roof, no matter what material is a challenge, metal roofing is no exception. In many cases, the fixed ladder on the roof, then support and ladder access aisle board composition.
Most manufacturers offer various forms of construction training. In the past, metal roofing for residential purposes, property owners and contractors, lack of training, lack of awareness is a major obstacle to the promotion of this roof, and now the situation has greatly improved.
edted by stone coated metal roof
订阅:
博文 (Atom)